Clearance Items
Capacitor - 100V, Ceramic Disc, ± 10%
100 V ceramic disc capacitors. ± 10% tolerance.
Please Log In to view prices
Chassis Box - 1590BB, Diecast, 4.71" x 3.70" x 1.18"
Chassis box perfectly suited for effects pedals and other DIY projects.
Colors Available:
Please Log In to view prices
Patch Cables - 3.5mm, Mono
Low cost, high quality 3.5mm patch cables in a variety of lengths and colors. The cables are super flexible, have a great droop, and are shipped coiled so no permanent kinks are formed. With the large selection of lengths and colors, these cables are the perfect choice for any sized system.
Colors Available:
Please Log In to view prices
Screw - M3, Phillips, Pan Head, Machine
Phillips panhead machine screw, M3 metric, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head. See S-HS-M3-6-X for colored 6mm M3 screws.
package of 5
Please Log In to view prices
Capacitor - Illinois, 450V, Axial Lead Electrolytic
Illinois Capacitor 450 V axial lead electrolytic. Rated for 85 degree operation.
Please Log In to view prices
Solder - Kester, 60 / 40, 44 Flux, 66 Core, .031 Dia, .5 oz
Kester 44 60/40 rosin core type. .031" diameter, 0.5 oz
Please Log In to view prices
Transformer - Hammond, High Voltage Plate & Filament, Vertical mount
- Vertical Mount. For Horizontal Mount, see P-T263-Z
- Primary 115 VAC, 60 Hz. - except as noted
- Enclosed, 4 hole, chassis mount.
- Minimum 6" long leads.
- Units can be run full wave bridge or full wave C.T.
- Class A insulation (105 degrees C).
- Hi-Pot test of 2,000V RMS.
- Conservative designs - CSA certified (209651).
Please Log In to view prices
Cover - Humbucker, 49.2mm, Nickel Silver, USA
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have a 49.2mm spacing.
Colors Available:
Please Log In to view prices
Bridge Rectifier - Single-phase, 2A, In-line
2A bridge rectifier in an inline package ideal for PCB use. Features:
- Low reverse leakage
- Low forward voltage
- High forward surge current capability
Please Log In to view prices
Transformer - Hammond, Low Voltage / Filament, Open, 6.3 VCT
- Open style, chassis mount transformers with a 115V 60Hz or 117 50/60Hz primary and a 6.3V center tapped secondary.
Please Log In to view prices
Cover - Humbucker, Open, Nickel Silver, USA
Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have no holes.
Colors Available:
Please Log In to view prices
XLR Plug - Amphenol, Female, Large Jaw, Nickel
XLR 3 pole female, stamped contacts, large jaws cable clamp.
Please Log In to view prices
Fret Wire - Stainless Steel, 2 ft lengths, various sizes
High quality stainless steel fret wire available in popular sizes.
Straight 2ft lengths sold individually or discounted by the pound.
Per pound quantities
SKU
Qty
Price
P-GTFW-STEEL-1
32
PRICE
P-GTFW-STEEL-3
22
PRICE
For standard 18% Nickel-Silver options please see:
SKU
Crown Width
Crown Height
Total Height
Tang Width
Stud Width
Additional Info
P-GTFW-STEEL-1
2.0 mm (0.079")
1.0 mm (0.039")
2.8 mm (0.110")
0.6 mm (0.024")
0.95 mm (0.037")
Similar size to Dunlop 6260, Stew Mac 147, commonly used on Vintage Fender, Banjos, Pre-War Gibsons
P-GTFW-STEEL-3
2.7 mm (0.106")
1.4 mm (0.055")
3.2 mm (0.126")
0.6 mm (0.024")
0.95 mm (0.037&qu
Straight 2ft lengths sold individually or discounted by the pound.
Per pound quantities
SKU
Qty
Price
P-GTFW-STEEL-1
32
PRICE
P-GTFW-STEEL-3
22
PRICE
For standard 18% Nickel-Silver options please see:
- Small Sizes - P-GTFW-S-X
- Medium Sizes - P-GTFW-M-X
- Jumbo Sizes - P-GTFW-J-X
SKU
Crown Width
Crown Height
Total Height
Tang Width
Stud Width
Additional Info
P-GTFW-STEEL-1
2.0 mm (0.079")
1.0 mm (0.039")
2.8 mm (0.110")
0.6 mm (0.024")
0.95 mm (0.037")
Similar size to Dunlop 6260, Stew Mac 147, commonly used on Vintage Fender, Banjos, Pre-War Gibsons
P-GTFW-STEEL-3
2.7 mm (0.106")
1.4 mm (0.055")
3.2 mm (0.126")
0.6 mm (0.024")
0.95 mm (0.037&qu
Please Log In to view prices
XLR Plug - Amphenol, Thermoplastic, Machined Contacts
XLR 3 pole male, stamped contacts, thermoplastic shell, jaws cable clamp. Plastic. Features:
- Thermoplastic shell
- Solder Bucket connections
- "Jaws" Cable Retention System
- Precision machined contacts
- Leading first mate last break socket contact
- Quick and easy assembly without screws
Please Log In to view prices
Switch - Carling, Toggle, SPST, Solder Lugs, Momentary
Carling, SPST toggle, momentary. 3A 250V, 6A 125V. Made in Mexico.
Please Log In to view prices
Cover - Tele, Neck, Open, Nickel Silver, USA
Original, made in USA, covers for open-style tele neck pickups. These premium tele covers are made of nickel silver.
Colors Available:
Please Log In to view prices
Nut Files - Double Edge, for guitars, 3 sizes
Double edge nut files featuring popular guitar gauges specially designed for slotting nuts. Each set of files is specifically designed for guitars of a particular type. This set of three files will cover the work of six and cuts a smooth round bottom slot. Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.
- 4” cutting edge
- Set of 3 files
- Made In Japan
package of 3
Please Log In to view prices
Vacuum Tube - 7543 / E130LF, Pentode, Sharp Cut-Off, RF
The 7534 is designed to provide low hum, non-microphonic operation through the incorporation of a helical wound heater and rigid mounting of the internal components. The 7534 is otherwise similar to, and a replacement for the 6AU6.
Please Log In to view prices
Fret Wire - 18% Nickel-Silver, 2 ft lengths, Jumbo sizes
High quality 18% Nickel-Silver fret wire in jumbo sizes.
Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-J-1 28 PRICE P-GTFW-J-2 26 PRICE P-GTFW-J-3 25 PRICE P-GTFW-J-4 22 PRICE P-GTFW-J-5 18 PRICE P-GTFW-J-6 21 PRICE P-GTFW-J-7 19 PRICE For additional sizes and options please see:
SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-J-1 2.6 mm (0.102") 1.0 mm (0.039"
- 2.6mm - 3.0mm Crown Widths, (0.102" - 0.118")
- 1.0mm - 1.45mm Crown Heights, (0.039" - 0.057")
Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-J-1 28 PRICE P-GTFW-J-2 26 PRICE P-GTFW-J-3 25 PRICE P-GTFW-J-4 22 PRICE P-GTFW-J-5 18 PRICE P-GTFW-J-6 21 PRICE P-GTFW-J-7 19 PRICE For additional sizes and options please see:
- Small Sizes - P-GTFW-S-X
- Medium Sizes - P-GTFW-M-X
- Stainless Steel - P-GTFW-STEEL-X
SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-J-1 2.6 mm (0.102") 1.0 mm (0.039"
Please Log In to view prices
Vacuum Tube - EF806 / EF86 / 6267, JJ Electronics, Long Plate
The JJ Electronic EF806S is a high quality reproduction of the classic EF86. This pentode features a robust construction with the internal shielding used in the original tubes. The JJ EF806 can be used in any EF86 circuit including microphones and amplifiers.
Please Log In to view prices
Fret Wire - 18% Nickel-Silver, 2 ft lengths, Medium sizes
High quality 18% Nickel-Silver fret wire in medium sizes.
Straight 2ft lengths sold individually or by the pound. For additional sizes and options please see:
SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-M-1 2.3 mm (0.091") 1.1 mm (0.043") 2.6 mm (0.102") 0.65 mm (0.026") 0.95 mm (0.037") A popular medium size for electric guitars P-GTFW-M-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.60 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-M-3
- 2.3mm - 2.4mm Crown Widths, (0.091" - 0.095")
- 1.1mm - 1.3mm Crown Heights, (0.043" - 0.051")
Straight 2ft lengths sold individually or by the pound. For additional sizes and options please see:
- Small Sizes - P-GTFW-S-X
- Jumbo Sizes - P-GTFW-J-X
- Stainless Steel - P-GTFW-STEEL-X
SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-M-1 2.3 mm (0.091") 1.1 mm (0.043") 2.6 mm (0.102") 0.65 mm (0.026") 0.95 mm (0.037") A popular medium size for electric guitars P-GTFW-M-2 2.4 mm (0.095") 1.2 mm (0.047") 2.8 mm (0.110") 0.60 mm (0.024") 0.95 mm (0.037") A popular tall and narrow style, similar size to Stew Mac 141 P-GTFW-M-3
Please Log In to view prices
Vacuum Tube - 6EW7, Dual Triode, Dissimilar
Dissimilar double triode utilizing the 9T9 bulb and pin configuration. The tube is designed to serve as a combined vertical deflection oscillator and amplifier.
Please Log In to view prices
Bridge saddle - Fender®, for Vintage Stratocaster
Genuine Fender® set of six nickel-plated chrome bridge saddles for use on American Vintage series Stratocaster models manufactured from 1986-present. Centered intonation screws, intonation springs and saddle-height adjustment screws included. Features:
- Set of six nickel-plated chrome bridge saddles
- Centered intonation screws, intonation springs and saddle-height adjustment screws included
- For American Vintage Stratocaster models (1986-2012)
package of 6
Please Log In to view prices
Pickup - Gotoh, HB-Classic Alpha, Humbucker, Made In Japan
The HB-Classic α is a vintage-style humbucker pickup. This pickup uses a made in USA Alnico 2 bar magnet for a smooth vintage tone. This pickup is wax-potted for sonic stability and uses a shielded 4-conductor wire for various wiring options. The HB-Classicα humbucker comes in various open and covered options to match the look of any guitar. Mounting screws and springs are included. Made in Japan.
Please Log In to view prices