Guitar Parts & Pickups
Guitars can lead a rough life and replacement parts can bring your axe to like new condition. But did you know that you can also change components to achieve different sounds? The options are endless!
Knob - Chicken Head, mini, high-quality, brass insert, Set ScrewHigh quality miniature chicken head knob with set screw for smaller applications. 0.90" long nose to tail. Mini Davies 2300 clone.
Knob - Vintage, set screw, brass insertGeneric white or brown vintage, priced per single knob. Set Screw. Height: ½", Top Diameter: ¾", Base Diameter: 13/16" Replacement for Fender: 099-0933-000 Multiple color options available.
Knob - Chicken Head, set screw, brass inset
- Fits ¼" Solid Shafts (Set Screw)
- Chicken head knobs are used everywhere on countless amps, stomp-boxes, etc.
- Brass Set Screw and Insert
- High Quality Plastic
Knob - Small, Indicator Line, set screwThe P-K380 is a high quality Davies 1510 clone. This classic design can be found on countless pedals, synths, amps and other equipment. The set screw uses a metal insert for additional stability and durability. This knob has an infilled painted indicator and fits 1/4" (6.35mm) pot shafts. The P-K380 pairs nicely with the color matched P-K801-BRASS-X knobs.
Knob - Chicken Head, Raised, set screwRaised plastic chickenhead knob with brass insert and set screw. 1.20" in length. Davies 2300 clone.
Knob - Black, White Line, Silver Top, Set Screw, Boss Style
Black knob with white line, silver top, set screw and brass insert. Fits ¼" shaft with set screw. These Boss style knobs come in a variety of sizes. See P-K383X for an unskirted version.
Knob - Set Screw, Marshall Style, black baseHigh quality Marshall style knobs with set screws. These knobs are available with the classic gold and silver top caps as well as an all black version. These knobs use a slotted set screw and fit 1/4 in. (6.35mm) pot shafts. 0.77" diameter x 0.62" tall.
Cap Colors Available:
Switch - Switchcraft, Toggle, 3-way, for Les Paul
One of the most rugged and durable switches available for your Gibson Les Paul or similar two pickup guitars.
Wire - 4 Conductor, Shielded, 28 AWG
Sold by the footShielded 4-conductor wire used in wiring pickups, controls etc. Shielded 4-conductor wire is commonly used in humbucking pickups to allow more wiring flexibility over the 2-conductor setup. Building a pickup using 4-conductor wire will allow you to wire up coil cut, phase switching, and series/parallel configurations. Additionally, 2 conductor pickups can be converted to 4-conductor using this wire.
- Sold per foot
- 28 AWG
- Foil shield
- 12”/3.2mm outer diameter
- Sold individually
Machine Screw - 3-48 x 1-1/4”, Phillips, Pan HeadOriginal, made in USA, 3-48 x 1-¼” machine screws. These premium screws are perfect for mounting humbucker pickups.
Knob - Large, Indicator Line, Set ScrewLarge, knob with line indicator and set screw similar in style to the Davies 1500 and 1510 knobs. Pairs well with P-K380X. Fits ¼” (6.35mm) pot shafts.
- Knob Height = 0.60"
- Pointer Diameter = 1.06"
- Fits 1/4" shaft with set screw
- Oversized Davies 1510 Clone
Knob - Mini Indicator, Set Screw, 15mm x 11mmMini fluted knob with infilled indicator line. Pairs well with the larger P-K850X. Fits ¼” (6.35mm) pot shafts.
- Height: 11mm
- Diameter: 15mm
- Fits 1/4" shaft with set screw
Screw - 6-32, Phillips, Pan Head, Machine, Zinc
Package of 5Phillips panhead machine screw, 6-32, zinc. Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Magnet - Rod, Alnico 5, .187", Vintage Chamfer
Alnico 5 rod magnets with a .187” diameter. These magnets feature a vintage style chamfer and are not magnetized. Great for vintage Strat style pickups and many others.
Knob - Chicken Head, Push-On, for knurled shaftHigh quality black plastic chickenhead knob. 1-1/4" in length. Push-on for split knurled shaft.
Switch - Switchcraft, Pickup Selector, for Gibson® StraightSwitchcraft 3 position Pickup Selector, Replacement for Gibson Straight-Type. As found on LP style solid body guitars.
Screw - 4-40, Phillips, Pan Head, Machine, Zinc
Package of 5Phillips panhead machine screw, 4-40, zinc. Designed to go through a hole or nut that is pre-tapped to form a mating thread for the screw. Has a general purpose bearing area and can be substituted in most applications for round, truss, or binding heads. Phillips drive is the most common drive used and is designed to "camout" when the screw reaches optimum tightness, thus preventing damage to the screw head.
Polepiece - Fillister, 5-40 x 0.75”, 1018 Steel, USAOriginal, made in USA, fillister head screws for use as polepieces in pickups. These premium polepieces have a 5-40 threading with a 0.75” length.
Knob - Top Hat, Embossed Numbers, Gibson StyleGibson style top hat knob with embossed numbers. Multiple color options available. Fits fine knurled pot shafts.
Wire - 20 AWG Solid Core, Lacquered Cloth Cover, 600V#20 solid copper wire with modern insulation and lacquered cotton braid finish. 105°C temperature rating, 600V. For a stranded version, see: S-W7XL
Switch - 3-Way lever for Telecaster
Oak 3 way lever switch for Tele® Standard U.S. size. Fits 1/16" x 1-1/16" slot.1-5/8" center to center screw spacing. 1-3/8" cavity depth. The importance of the “right” feel required by guitarists has resulted in a continually designed and developed lever switch, providing a superior product. For over three decades, these lever switches have been tested and refined to meet the needs and desires of guitar players all over the world. Patented “T” slugs secure solder-lug clips to the stator. Mounting screws included.
Wire - Push Back Cloth, Vintage StyleVintage style push back wire. Especially useful for building or repairing single coil pickups. Push-back style eliminates the need for stripping.
Sold by the foot
- Outer diameter: 0.07"
- Sold by the foot
Knob - Pointer, Large, Knurled, vintage index lineThis vintage knob design has been used on numerous boutique pedals. These classy knurled pointer knobs are made from a solid mold, feature a slotted set screw, and fit ¼" solid shaft potentiometers. Davies 1470 clone.
Wire - Bus, 20 AWG, Tinned Copper
Sold by the footSolid tinned copper bus wire. Great for point to point builds, guitar electronics wiring, or any situation where insulated wire is not required. 105°C temperature rating, 600V. Sold by the foot. For 100ft spools, please see S-W428X.