Guitar Parts & Pickups

U.S. made threaded posts for ABR-1 bridges. The brass posts feature a high quality plating and a #6-32 threading. Each post is 1 1/16” in length. This vintage style of post is meant to mount directly to the body of the guitar.

Gotoh locking nuts are superior quality locking nuts that directly replace original Floyd Rose and Floyd Rose style locking nuts. Top mount. Width: 1-11/16'' (43mm). Included: Retainer bar, screws, wrench. Locking nut for Floyd Rose tremolo units.

The 6060-00 is the perfect option to replace and upgrade the nut on your Epiphone guitar. It is also a great option for many other common acoustic and electric guitars. It comes pre-slotted to make for a quick and easy install. This nut is made of Tusq XL, the same material as standard Tusq but impregnated with PTFE. The lubrication from the PTFE prevents strings from binding in the slots. Tusq XL offers better tuning stability especially when using a tremolo or bending strings. Tusq XL also has more of a midrange boost as compared to Tusq. Dimensions:

• Length - 1.730 in. (43.94mm)
• Width - 0.243 in. (6.16mm)
• Height - 0.357 in. (9.08mm)
• E to E - 1.344 in. (34.14mm)
• Radius - 15 in.

For a standard Tusq version of this nut, see P-GNUT-TUSQ-EPS-5.

Includes all parts but the magnet wire, all sets are ready for winding. Kits include Alnico 2 magnet, bobbins, poll screws, slug screws, baseplate, and coil lead wires. These humbuckers feature two rows of adjustable polepiece, in bridge and neck position spacings. The neck pickup is warm and buttery, with a clear, present top end. The bridge pickup is fat and honky, with a rich low end and great clarity. Great choice for rock, rockabilly, blues, country and more!

• Resistance(Kohm) : 4.8K
• Magnet : Alnico 2 Bar

This kit builds one pickup.

Original Fender® Stratocaster tremolo arm (also known as "whammy bar"). Includes one tremolo arm with a white and an aged tremolo knob.
Fits most American Series and American Standard (USA) instruments manufactured from '86-Present. Tremolo arm threading is the same as American Vintage models.

Set of five Stratocaster® tremolo tension springs for use on American Vintage series and Custom Shop instruments.

• Set of five nickel-plated steel tremolo tension springs
• For American Vintage series and Custom Shop instruments

#8 x 1.5” inch neck mounting screws. These neck mounting screws are chrome plated and are the standard screws used on many bolt-on neck guitars. Includes a full set of four Phillips screws.

Original, made in USA, covers for humbucker pickups. These premium humbucker covers are made of nickel silver and have no holes.

The Gotoh "Relic" series is purposefully designed to give an "aged" or "vintage" look to your guitar. 2 pieces per set, screws included.

Two piece rosewood bridge with metal saddle. Adjustable style. 6” wide. For 6 or 12-string guitars with a tailpiece.

Fender® Stratocaster string guides (2 pack)
String guides are also known as string trees or string retainers.

The newest addition to the Grover family, these locking machine heads utilize the famous 18:1 Rotomatic® design with a “thumb screw” mechanism which locks the string into place. Insert the string through the post hole, wrap around once, then lock by tightening with the thumb screw. Perfect replacement for the most standard machine heads. Includes all mounting hardware. Includes 3 treble and 3 bass.

Go ahead and jump! You're protected by Fender® strap locks

Jaguar style preset control plate in chrome. Perfect replacement for most Jaguar style guitars. 4.57” x 1.79” plate mounting center distance (0.14” diameter, recessed).

If you are looking for a tremolo that is designed for enhanced sustain and better reliability, then you have found it. The VSVG Vintage tremolo features enlongated baseplate holes so the screws won't bind and it gives a very smooth, accurate return to pitch. With the string mounting holes being staggered in the steel block you will find much more tuning stability because of the more consistent string angle over the adjustable locking bent-steel saddles. Hardware included.

Direct replacement for most Fender P-Bass and Jazz Bass guitars. Superior high quality and precision made. This is for those who demand only the best for their Bass without breaking the bank. Mounting screws included.

1:15 gear ratio. Hardware included.

U.S. made vintage style ABR-1 thumbwheels. These steel thumbwheels feature high quality plating and are tapped for 6-32 threaded posts.

Anodized aluminum Stratocaster® style pickguards with 11 mounting holes. These pickguards are cut for the classic Strat® configuration. All mounting holes are countersunk.

Grover Vintage Tuners. 'Gibson Deluxe' Style. 3-Per-Side. Package of 6. 'Grover Deluxe' on tuners. 14:1 gear ratio This vintage machine uses a die-cast, two-piece housing for additional strength and precision. The unique bearing surface in the housing provides a rigid string post enhancing the alignment of the gear and worm. The 14:1 gear ratio provides for fine tuning.

High quality 18% Nickel-Silver fret wire in jumbo sizes.

• 2.6mm - 3.0mm Crown Widths, (0.102" - 0.118")
• 1.0mm - 1.45mm Crown Heights, (0.039" - 0.057")

Straight 2ft lengths sold individually or discounted by the pound. Per pound quantities SKU Qty Price P-GTFW-J-1 28 PRICE P-GTFW-J-2 26 PRICE P-GTFW-J-3 25 PRICE P-GTFW-J-4 22 PRICE P-GTFW-J-5 18 PRICE P-GTFW-J-6 21 PRICE P-GTFW-J-7 19 PRICE For additional sizes and options please see:

• Small Sizes - P-GTFW-S-X
• Medium Sizes - P-GTFW-M-X
• Stainless Steel - P-GTFW-STEEL-X

SKU Crown Width Crown Height Total Height Tang Width Stud Width Additional Info P-GTFW-J-1 2.6 mm (0.102") 1.0 mm (0.039"

High quality bone nut blank with extra length, width, and height. These blanks leave the shaping, slotting, and polishing to you so you can control your own custom feel and appearance.

• Measures 45mm x 10mm x 4.95mm
• Sold individually

Replacement chrome 4 bolt guitar neck plate. 4 screws included.

Vintage-style chrome bridge assembly for use on most Standard, Deluxe, Roadhouse™, Lone Star™, and Blacktop Stratocaster models manufactured from 2006-present. Includes six bent "Fender"-stamped saddles, intonation screws and springs, and saddle-height adjustment screws. Mounting hardware, tremolo claw, tremolo springs and tremolo arm not included.

• 2-1/16" mounting spacing*
• Standard 10/32 tremolo arm threading
• For a variety of Stratocaster models (2006-present)

*Note that 2-1/16" bridge mounting spacing means that bridge-mounting screws will not fit vintage or vintage reissue instrument unless modified to do so.