Jacks & Plugs

Heavy duty mil-spec barrel plug from Switchcraft. The S10 is a high current, non-sealed power jack with a similar design as the ¼” jacks from Switchcraft. The plug is rated for up to 11A of current.

Dual, gold plated binding post.

• Red and black posts
• Accepts either single or dual banana plugs
• Mounts in two ½" holes on ¾" centers, panel thickness up to ¼"
• 15A rating
• Gold plated contacts.

Switchcraft ¼" Right Angle Plug (Type 226) Good for tight spaces Large terminals accept up to 16 AWG wiring (cables up to 0.25" diameter) All Metal exterior

Hex nuts for Rean jacks. Package of 12 Genuine Fender replacement jack nuts: 7/16-20 x 1/8 nickel-plated Used with many Fender amplifier jacks

2-pole 1/4" professional straight phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.

1/4" professional phone plug, gold contacts, black shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Switchcraft ¼" Mono 2-conductor cable-mount plug. Flat shielded handle with solder terminals. Type 228. Used in Fender amps for speaker connections. Also perfect for close quarters pedal-to-pedal connections. Includes hardware

1/4" professional right-angle phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Switchcraft 285L ¼” plug for large cables. The 285L features the same spec’s and build quality as the Switchcraft 280 but features a larger cable clamp and a .375" rear hole in the handle. These are great plugs for thicker wires such as speaker cables. Specifications:

• Sleeve, Tip and Body: Nickel-plated copper alloy
• Terminals: Solder lug - Tinned copper alloy
• Handles: Shielded - machined Nickel-plated copper alloy
• Tubular insulator inside handle

Amphenol "Musician Series II" Phone Plug. 1/4" Mono right-angle plug with diecast shell, black finish, gold plated contacts and flexible grommet cable protection. Internal cable clamp fits cable outer diameters ranging from 0.256" to 0.315" (6.5 mm to 8 mm).

Original replacement for Fender® amps. ¼" Stereo Input Jack that has 9 PCB mount terminals.

2-pole 1/4" professional right-angle phone plug, gold contacts, black shell. Large jaw cable clamp for use with cable with an outer diameter of 5.5mm to 6.5mm.

1/4" professional right-angle phone plug, nickel contacts, nickel shell The heavy duty professional phone plug series improves on the design of the existing C series by offering the thinnest available A-gauge 1/4" plug with unique Neutrik chuck type strain relief on the market. The slimline shell with a width of 14.5 mm meets the most recent requirements for highest density jackfields (15.88mm jack pitch). The precise machined one-piece tip contact without rivets makes it unique and avoids hook up in a socket or break off the tip. The Plug X Series serves all applications such as guitar applications, audio cables, snakes, speakers, amplifiers and mixing desks.

Switchcraft ¼" Mono 2-Conductor Input Jack, Isolated Make Circuit (Type 13). Includes nut and washer

Plastic jack cup for input jack on speaker cabinets.

• Diameter = 3 3/4''
• Center to Center Screw Hole Spacing Distance = 2 1/8''

Amphenol "T-Series (Pro Range)" Phone Plug. 1/4" Mono straight plug with large Jaws cable clamp, metal backshell and black finish. Internal cable clamp fits cable outer diameters ranging from 0.236” to 0.295” (6 mm to 7.5 mm).

Pure Tone’s new long threaded three pole (stereo) 1/4" jack provides full contact for improved connections and signal integrity. This jack locks the cable securely into place creating a greater surface area connection to carry more signal for an improved frequency stability. This jack is a great choice for both mono and stereo applications as well as guitars using active electronics.

Made by G&H industries. High quality, oxygen-free copper core phone plugs. Made in America. For large wire, 8-12 gauge speaker cable.

High quality made in USA ¼” plugs from Lava Cable. This right angle plug features an ultra low profile and a unique soldered connection that provides a quicker assembly than standard soldered connectors. The insulation system used in the plugs ensures a solid connection that is nearly impossible to short. Lava Soldered Right Angle Connectors are the smallest profile soldered plugs on the market today at only .405” in width and .515” in outer diameter. Soldering is easy with just one small solder point. Included insulators prevent shorting. To assemble:

• Strip 0.75” of the outside jacket from the end of the instrument cable.
• Feed the stripped end including the shield braid through the large black plastic insulator tube.

Switchcraft Type 188 Jumbo Plug. ¼" Mono 2 Conductor Heavy Duty Cable Mount Plug - Nickel Finish.

Fender style 1/4" straight mono (tip-sleeve) open plug. Perfect for use as "open" plug for Fender "Hot Rod" and "Blues Reissue" amps having both "Main Speaker" and "External Speaker" jacks allowing you to connect an alternate speaker impedance with the open plug inserted in the "Main Speaker" jack (speaker load configuration 3).

1/4" Mono 2 Conductor Jack, Transfer Circuit. Used in Fender, part number: 004-1701-000. Includes nut and washer.

4 pole cable connector, chuck type strain relief. Mates with W-SO-J41 The industry-standard for loudspeaker connections offer extremely reliable and robust cable connectors with a reliable locking system. They feature solid contacts with screw-type terminals including a stranded wire protection which offer also solder termination. Features:

• Current rating 40 A continuous, 50 A audio signal with 50% duty cycle
• Only 3 parts, easy to assemble
• High impact materials – long-lasting and reliable
• Easy and extremely precise locking system "Quick Lock"
• 1 piece strain relief, chuck for 6 to 10 mm cable O.D.
• Improved grip on latch

Type 152B. ¼" Female Stereo Input Jack 3-conductor. Thick panel-mount jack with cable clamp. Brass finish.