Knobs
Knob - Plastic, Set Screw, Skirted w/ Dot, 1.01" Diameter
Large black plastic control knob with set screw and brass insert. This skirted knob features a radial-brushed metal cap. The grip has large fluting with a white dot indicator on both the top of the grip and on the skirt of the knob. The style is similar to the Cosmo knobs found on many Moog synthesizers. Fits ¼” (6.35mm) pot shafts.
Please Log In to view prices
Knob - Plastic, Set Screw, Neve / Marconi Style, 0.685” Diameter
Plastic knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.685 inches. Fits ¼” (6.35mm) pot shafts. Note: Pair with R-VADAPT-125 to fit 0.125” potentiometer shafts. For a skirted version see P-K397-X. See P-K696 for the dual concentric knob lower.
Colors Available:
Please Log In to view prices
Knob - Chicken Head, Push-On, for knurled shaft
High quality black plastic chickenhead knob. 1-1/4" in length. Push-on for split knurled shaft.
Colors Available:
Please Log In to view prices
Knob - Scalloped Edge, Indicator Line, Set Screw, Brass Insert
The P-K801-BRASS is a custom built Davies 1900H clone. This knob features a brass insert in addition to a thick plastic build resulting in the most solid version of this knob available. The thick plastic eliminates the unfortunate hairline fractures that can commonly be found near the set screw of other versions. The P-K801-BRASS has an infilled painted indicator and fits ¼” (6.35mm) pot shafts.
Colors Available:
Please Log In to view prices
Knob - Davies, 1470, Daka-ware, Large, Pointer
High-quality USA made knobs from Davies Molding. The large 1470 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals such as the Klon and countless EHX effects.
Colors Available:
- Height: 0.50 in.
- Length: 1.13 in.
- Fits ¼" shaft with set screw
Please Log In to view prices
Knob - Plastic, Set Screw, Neve / Marconi Style, 0.495” Diameter
Plastic knobs with a set screw and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The diameter is 0.495 inches. Fits ¼” (6.35mm) pot shafts.
Colors Available:
Please Log In to view prices
Knob - Plastic, Set Screw, Vertical Line, 0.525" Diameter
Small plastic control knob with set screw and brass insert. This knob features a radial-brushed metal top and a stylish vertical knurl. The style is similar to the Boss middle knobs used on many pedals. Fits ¼” (6.35mm) pot shafts.
Colors Available:
Please Log In to view prices
Knob - Mini Indicator, Set Screw, 15mm x 11mm
Mini fluted knob with infilled indicator line. Pairs well with the larger P-K850X. Fits ¼” (6.35mm) pot shafts.
Colors Available:
- Height: 11mm
- Diameter: 15mm
- Fits 1/4" shaft with set screw
Please Log In to view prices
Knob - K5, Black, Set Screw, for Marshall
Black K5 knob with gold or silver cap and long indicator line. ¼" shaft with set screw. Replacement for Marshall. Measures 0.75" in height. See P-K342-NOI for a version with no indicator line.
Cap Colors Available:
Please Log In to view prices
Knob - Plastic, Set Screw, Boss Style, 0.63” Diameter
Plastic control knob with set screw and brass insert. This skirted knob is similar in style to the knobs found on many Boss pedals. It features a fluted grip with a radial-brushed metal top. The indicator line extends from the top of the down down through the bottom of the skirt. Fits ¼” (6.35mm) pot shafts.
See P-K370X for a skirted version.
Colors Available:
See P-K370X for a skirted version.
Please Log In to view prices
Knob - Plastic, Set Screw, Pinched w/ Line, 0.630" Diameter
Small plastic control knob with set screw and metal insert. This knob has a pinched grip similar to the Davies 1510 but features a smaller diameter and scooped cutout for a distinctive appearance. Fits ¼” (6.35mm) pot shafts.
Colors Available:
Please Log In to view prices
Knob - Plastic, Set Screw, Skirted w/ Top Line, 0.87" Diameter
Black plastic control knob with set screw and brass insert. The grip has a thick vertical knurl with an indicator line on a raised top. This skirted knob is a close match to the knobs used on some late 1960s Fuzz Face® pedals as well as the Eric Johnson signature model. Fits ¼” (6.35mm) pot shafts.
- Height: 0.77 in.
- Diameter: 0.87 in.
- Fits ¼" shaft with set screw
Please Log In to view prices
Knob - Davies, 1400, Daka-ware, Small, Pointer
High-quality USA made knobs from Davies Molding. The small 1400 pointer knob is made of solid phenolic and features a fine ridged grip with a distinctive point. This classic knob has been used on a variety of guitar pedals and audio equipment such as the Pultec EQP-1A.
Colors Available:
- Height: 0.38 in.
- Length: 0.84 in.
- Fits ¼" shaft with set screw
Please Log In to view prices
Knob - Plastic, Set Screw, Neve / Marconi Style, Wing, Skirted, 1” Diameter
Plastic wing knobs with set screws and brass insert. These knobs are a close match for the classic knobs used on Marconi radios and Neve consoles. They feature an inlay indicator line. The grip diameter is 0.693 inches with a 1 inch clear skirt. Fits ¼” (6.35mm) pot shafts.
Colors Available:
Please Log In to view prices
Knob - Rogan, PT Series, 1PS, Small, Skirted, Pointer, D-Shaft
High-quality USA made knobs from Rogan Corp. These small, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.
For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
- Height: 0.71 in.
- Diameter:0.57 in.
- Fits 6mm D Shafts
- Indicator on round side of D-shaft
For a T18 knurled version of this knob, see P-K271PS-W. A variety of different sizes are available from the PT Series.
Please Log In to view prices
Knob - Top Hat, Embossed Numbers, Gibson Style
Gibson style top hat knob with embossed numbers. Multiple color options available. Fits fine knurled pot shafts.
Colors Available:
Please Log In to view prices
Knob - Rogan, 155 Series, Witch Hat, 0-10
High-quality USA made knobs from Rogan Corp. These phenolic knobs feature a brushed aluminum inlay and a skirt numbered 0-10. This knob was used on many vintage Music Man amps and the 155 Series knobs can be found on classic gear from Sunn, Music Man, Gibson and others. Fits ¼" shaft potentiometers.
A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-1 Small-Skirted Witch Hat P-K155-3 Large Witch Hat w/ Arrow
- Height: 0.65 in.
- Diameter: 1.13 in.
- Fits ¼" shaft with set screw
A variety of different knobs are available from the 155 Series. See the links below for the full selection. P-K155-1 Small-Skirted Witch Hat P-K155-3 Large Witch Hat w/ Arrow
Please Log In to view prices
Knob - Gotoh, Dome, set screw, knurled for grip, 1/4” Solid Shaft
¼” (6.35mm) solid shaft versions of Gotoh’s dome knobs. These premium knobs feature a diamond pattern knurl, a high quality finish and a matching set screw. For the 6mm solid shaft versions, see P-K250X
Colors Available:
Please Log In to view prices
Knob - Top Hat, Black with Silver Cap, Gibson Style
Black Gibson style top hat knobs with silver caps. Fits fine knurled (24 spline) pot shafts. Top hat knobs can be found on many Gibson SG models.
Please Log In to view prices
Dial Plate - 0 to 100, Black on Brushed Metal
Dial plates with 0-100 indicator marks. These plates are a simple way to add panel graphics to controls. They are easy to install beneath the nut of a potentiometer like a washer. The silk screened graphics on the brushed metal plate gives projects a clean and professional appearance. 40mm Dial Plate
60mm Dial Plate
- 40 mm (1.575”) outer diameter
- 9.95 mm (0.392”) inner diameter
- Best for 25.4mm (1”) or smaller knobs
60mm Dial Plate
- 60mm (2.362”) outer diameter
- 9.95mm (0.392”) inner diameter
- Best for 40.6 mm (1.59”) or smaller knobs
Please Log In to view prices
Knob - Aluminum, Set Screw, Notched Tip, 1.25" Diameter
1.25" diameter knurled aluminum knob, 'positive grip', notched tip indicator, fits ¼" shaft. With set screw. Multiple color options available.
Colors Available:
Please Log In to view prices
Knob - Speed, Embossed Numbers, Gibson Style
Gibson style speed knob with embossed numbers. For 6mm 24 teeth knurled shaft.
Colors Available:
Please Log In to view prices
Knob - Chicken Head, Zonk Style, Set Screw
High quality chicken head knobs that resemble the style of knob found on the Zonk Machine II and Shatterbox fuzz pedals. The Zonk chicken head knob has a contoured center band with a textured finish. The outer dome has a shiny finish offering a visual contrast. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
Colors Available:
- Height: 0.75 in.
- Length: 1.065 in.
- Fits ¼" shaft with set screw
Please Log In to view prices
Knob - Chicken Head, Micro, Knurled Shaft, 0.65” Diameter
Plastic chicken head knobs for coarse knurled shafts. These tiny chicken head knobs are great for pedal builds or cramped face plates. They feature an inlay indicator line. The total length of the chicken head is 0.93 inches. Fits T18 knurled shafts.
Please Log In to view prices