Transistor - BC238B, Silicon, TO-92 case, NPN
BC238B NPN transistor in a TO-92 package. The BC238 is used in a variety of vintage pedals such as the Schaller Fuzz, a version of the Brian May treble boost,and later Jen / Tonebender fuzz pedals. The BC238B is a variant of the BC108B and works well in other classic fuzz pedals such as Fuzz Face and Big Muff builds.
Transistor - BC148C, Silicon, Lockfit case, NPN
BC148C NPN transistor in a rare Mullard Lockfit package. The BC148C is the equivalent of a BC108C but in the Lockfit package rather than a TO-18. The BC148C was used in a variety of audio and radio equipment and works well for fuzz and other effects.
Transistor - 2N2646 Programmable Unijunction
2N2646 programmable unijunction transistor often referred to as a PUT. The 2N2646 can be found in many tremolo effects pedal projects and vintage classics such as the Vox Repeat Percussion.
Transistor - OC46, Germanium, SO-2 glass case, PNP
OC46 PNP germanium transistors. The OC46 is a popular PNP for fuzz pedals and boost effects. It can be found in vintage electronics and modern fuzz pedals. This transistor is in a black glass SO-2 package with long leads commonly found on germanium transistors.
Transistor - OC42, Germanium, SO-2 glass case, PNP
OC42 PNP germanium transistors. The OC42 is a popular PNP for fuzz pedals and boost effects. It can be found in vintage electronics and modern fuzz pedals. This transistor is in a black glass SO-2 package with long leads commonly found on germanium transistors.
Transistor - OC41, Germanium, SO-2 glass case, PNP
OC41 PNP germanium transistors. The OC41 is a popular PNP for fuzz pedals and boost effects. It can be found in vintage electronics and modern fuzz pedals. This transistor is in a black glass SO-2 package with long leads commonly found on germanium transistors.
Transistor - AC132K, Germanium, Heatsink TO-1 case, PNP
AC132K PNP germanium transistors. The AC132K is a popular PNP for fuzz pedals and other effects. This transistor is in a thick rectangular heat-sink package with long leads commonly found on germanium transistors.
Vacuum Tube - 12AX7 / ECC83, Redbase, Tube Amp Doctor, Premium Selected
The all-new designed TAD 12AX7 / ECC83 Redbase is a miniature, high-mu twin triode with very good gain. These tubes are selected and recommended for guitar amps to improve overall responsiveness and dynamics. Because of its cathode-to-heater voltage-withstand capability, this tube works perfectly as a cathode follower. Best for thick, clean tones as well as for those modern preamps where a deep low end is required as well as for sounds requiring fat midrange, detailed airy top end and lots of power from the preamp. Recommended for all positions in medium gain amps or for V2+ positions in high-gain amps. For V1 in general but especially for high-gain amps or phono/audio-amps, we recommend the new 7025 / E83CC Redbase Highgrade T-7025-RB-TAD.
Vacuum Tube - 7025, Redbase, Tube Amp Doctor, High Grade
The all-new TAD 7025 / E83CC Redbase Highgrade is carefully selected for all the demanding gain stages in any guitar or headphone amp, tube microphones or the extremely sensitive phono preamp-positions in audio amplifiers. Tonally, this tube produces fine, airy, silky and pleasant highs, a complex and dense midrange with clarity and definition in the low end - providing maximum smoothness and zero microphonics. Great warm cleans and creamy overdrive. Fine, unobtrusive highs, complex, dense mids and clear real bass. Selected for demanding applications for maximum smoothness and zero microphonics - even with very sensitive input stages of high-gain amplifiers.
Resealable Bag - Anti-Static, Polyethylene, Heavy duty, Zip Top
Resealable anti-static bags with a zip top. These pink reusable bags are made of polyethylene and are ideal for storing static sensitive electronic parts such as transistors, JFETs, ICs, CMOS, etc. The zip top uses a heavy duty double-track zipper.
Knob - Painted Phenolic, Set Screw, Premium RCA Style, 33mm Skirt, PointerPainted phenolic knobs with a set screw and brass insert. These unique knobs closely match the colorful RCA style of knobs used on vintage test equipment, radios, studio consoles and other equipment. They are sometimes referred to as fester knobs. These classic knobs are painted to match the style of the original painted RCA knobs. The paint is a durable chip-resistant coating. The RCA style knobs feature an inlay indicator line. Fits ¼” (6.35mm) pot shafts.
- Height: 0.792 in. (20.1 mm)
- Diameter: 1.293 in. (33 mm)
- Fits ¼" shaft with set screw
Knob - Phenolic, Set Screw, Chicken Head
High quality phenolic knob with a classic chicken head design. This knob has an infilled indicator line. Fits 0.25” (6.35mm) shafts with set screw and brass insert.
- Height: 0.485 in.
- Length: 1.25 in.
- Fits ¼" shaft with set screw
- Brass Insert
- High Quality Phenolic
Knob - Plastic, Set Screw, Skirted Pointer, 1.125" DiameterLarge black plastic control knob with set screw and brass insert. This distinctive pointer knob is similar to the selector knobs used on original MiniMoog and Moog modular synths. It features a triangular pointer, a radial brushed metal top, and a line indicator. The large skirt has a diameter of 1.125 inches. Fits ¼” (6.35mm) pot shafts.
Knob - Aluminum, Set Screw, Short Line, 0.495" DiameterAnodized aluminum knob with short indicator line and set screw. This slim, solid aluminum knob has a straight knurled grip with a diameter of 0.495”. It also features a counterbore which allows it to hide pot bushings for a clean look. Fits ¼” (6.35mm) pot shafts.
Screw - Oval Head, #8 x 1.5”, for Neck Mounting
Package of 4#8 x 1.5” inch neck mounting screws. These neck mounting screws are chrome plated and are the standard screws used on many bolt-on neck guitars. Includes a full set of four Phillips screws.
¼" Plug - Switchcraft, Vintage, Brass, Cable-Mount
High quality vintage-design ¼” plug from Switchcraft. This TS (mono) plug features an all metal handle (for .29 to .30 inch cable diameter), cable clamp and a heavy copper alloy-plated flex relief spring (for .265 inch cable diameter maximum).
Resistors - ¼ Watt, Metal Film, 1% tolerance
Package of 5Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. Package of 5. These resistors are perfect for pedal builders! 1/4 watt.
Resistor Kit - ⅛ Watt, Metal Film, 1% tolerance, 5 of each value
Package of 230Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet.
Resistor Kit - ¼ Watt, Metal Film, 1% tolerance, 5 of each value
Package of 845Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet.
Resistor Kit - ¼ Watt, Carbon Film, 5% tolerance, 5 of each value
Package of 80Carbon Film resistors are made by vacuum depositing a thin carbon film on a ceramic form. A good choice for applications which require a steady, low power drop. Package of 5. These resistors are perfect for pedal builders! 1/4 watt ± 5% tolerance EIA color coded .24" long x .08" diameter Resistance Values (5 each) 100 470 1K 2.7K 4.7K 8.2K 10K 22K 33K 47K 100K 150K 220K 470K 560K 1M
Capacitor - Mod® Electronics, 50V, Oil Filled, Axial Lead
Mod® Electronics Oil Caps are high quality, hand-crafted capacitors that are the perfect choice for guitars, amplifiers, and all audio equipment. Each capacitor is impregnated with mineral oil for a void-free winding providing highly stable capacitance. The capacitor is hermetically sealed in an aluminum casing to ensure a long life. The detailed construction results in a precise capacitance with a tolerance of ±10%. Mod® Oil Caps also feature a red stripe to designate the outside foil. The 50V series are in smaller packages that are perfect for guitars, effects and more.
- Casing: Hermetically sealed aluminum
- Dielectric: Mineral oil
- Lead Diameter: 20AWG
- Termination Style: Axial
- Tolerance: ±10%
- Values: .001 μF - .047 μF
- Voltage Rating: 50V
String Cutters - Dunlop, System 65, Compact
The Compact String Cutter delivers enough pounds per square inch to cut through just about any string. Don’t let the diminutive size fool you. The Compact String Cutter is made from chromium-vanadium steel with a laser-cut edge for strong, precise cuts.. Dunlop even tested it on a .160-gauge bass string, and the cut was fast and clean. This tool will do all the hard work for you—just give it a squeeze, and let that laser-cut edge do its thing. Keep a Compact String Cutter in your gig bag for quicker and easier string changes.
Turrets - Bifurcated, Screw Mount
Package of 10Bifurcated turrets with a screw mount that works on boards with thicknesses of 1.5mm to 4mm. Made of gold plated brass. These are sometimes referred to as split or forked turrets. Includes a mounting washer, lock washer, and mounting nut. The staking tool is not required for these turrets.
¼" Jack - Stereo, Panel Mount, Low Profile
Panel mount stereo jacks with a very low profile. These jacks have a smaller footprint than the Lumberg jacks that are popular for tight pedal builds. They are perfect for top mounted jack pedal builds and any other project where space is limited. Mounting nut and flat washer included.
- M9*0.75 Bushing Thread
- Stereo 3-Conductor (TRS)
- Open Circuit (does not have switched terminal).
- Includes nut and washer.