Op-Amp - TL062, Dual, Low-Power, JFET Input, 8-Pin DIP

Op-Amp - TL062, Dual, Low-Power, JFET Input, 8-Pin DIP

Op-Amp - TL062, Dual, Low-Power, JFET Input, 8-Pin DIP image 1
Click to zoom in
In Stock

Dual low power TL062 opamps in an 8-pin DIP package. The TL062 offers a high input impedance and 1MHz bandwidth.

The JFET-input operational amplifiers of the TL06x series are designed as low-power versions of the TL08x series amplifiers. They feature high input impedance, wide bandwidth, high slew rate, and low input offset and input bias currents. The TL06x series features the same terminal assignments as the TL07x and TL08x series. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in an integrated circuit.

Crosstalk Attenuation120dB
Equivalent Input Noise Voltage42 nV/√Hz
Input Resistance10^12 Ω
Junction-to-Ambient Thermal Resistance85°C/W
Max + Supply Voltage18V
Max - Supply Voltage-18V
Max Case Temperature for 60 Seconds260°C
Max Differential Input Voltage±30V
Max Input Bias Current200pA
Max Input Offset Current200pA
Max Input Offset Voltage15mV
Max Lead Temperature 1.6mm (1/16") from Case for 10 Seconds300°C
Max Operating Virtual Junction Temperature150°C
Max Storage Temperature150°C
Max Supply Current (Each Amplifier)250µA
Max Total Power Dissipation (Each Amplifier)7.5mW
Min Common-Mode Input Voltage Range±11V
Min Common-Mode Rejection Ratio70dB
Min Large-Signal Differential Voltage Amplification3V/mV
Min Maximum Peak Output Voltage Swing±10V
Min Slew Rate at Unity Gain1.5V/μs
Min Storage Temperature-65°C
Min Supply-Voltage Rejection Ratio (ΔVCC± /ΔVIO)70dB
Overshoot Factor10%
Recommended + Supply Voltage5 to 15V
Recommended - Supply Voltage-5 to -15V
Recommended Ambient Temperature0-70°C
Recommended Common Mode Voltage VCC+-4V
Recommended Common Mode Voltage VCC-+4V
Temperature Coefficient of Input Offset Voltage10μV/°C
Typical Common-Mode Input Voltage Range-12 to 15V
Typical Common-Mode Rejection Ratio86dB
Typical Input Bias Current30pA
Typical Input Offset Current5pA
Typical Input Offset Voltage3mV
Typical Large-Signal Differential Voltage Amplification6V/mV
Typical Maximum Peak Output Voltage Swing±13.5V
Typical Slew Rate at Unity Gain3.5V/μs
Typical Supply-Voltage Rejection Ratio (ΔVCC± /ΔVIO)95dB
Typical Supply Current (Each Amplifier)200µA
Typical Total Power Dissipation (Each Amplifier)6mW
Unity-Gain Bandwidth1MHz
Packaging Information
Packaging Dimensions0.365 in. × 0.325 in. × 0.285 in.
Weight (Packaging)0.0031 lbs.

My Project Lists

You must be logged in to add items to a project list.

Specifications, Files, and Documents

PDF: Specification Sheet Specification Sheet2.52 MB
Questions? Contact us at [email protected], or give us a call at 480-755-4712