Pedal Parts / DIY

Clear dust cover for use with 16mm potentiometers. These covers slide over the back of the pot covering the holes and gaps to help prevent dust from accumulating inside avoiding potential repairs and replacing down the road. These covers are a great choice for tight builds to help insulate the PCB or other parts from the backs of potentiometers. The dust cover is made of clear hard plastic and is easy to install on Alpha 16mm pots.

4.40" x 2.38" x 1.65" (112mm x 61m x 42mm) diecast aluminum enclosure. Equivalent to the Hammond 1590BS enclosure. This enclosure is a taller version of the 1590B allowing for top mounted jack and more overall area for larger projects.

Genuine Cliff™ replacement bezel for S4 Series jacks. These can be used with any of our Cliff™ jacks using the metal ferrule style nut. Sold individually.

Equivalent to Hammond P-H1590N1. Depending on the manufacturer, this enclosure is usually very similar to a 125B.
Measures 4.77" x 2.58" x 1.41". Add 0.16" to enclosure depth for lid.

1591T Series enclosure made of clear polycarbonate. The 1591C is a similar size to the 1590N1 / 125B diecast aluminum enclosures. Includes four cover screws and pre-installed brass inserts.

• Ideally suited for mounting printed circuit boards.
• Perfect for applications where parts, sensors or indicators need to be visible.
• Crystal Clear version is almost totally transparent.
• Integral card guides accept 1.5 mm (0.062”) P.C. cards.
• Lap joint construction provides protection against access of dust and splashing water.
• Designed to meet IP54.
• Molded from flame retardant, easy to machine, translucent polycarbonate (material carries a UL flammability rating of 94V-2).
• Lid is secured with M3 x 10 mm Phillips machine screws, threaded into integral brass bushings.

High-quality USA made knobs from Rogan Corp. These large, skirted pointer knobs from Rogan’s PT Series feature a soft rubber grip molded over a solid polymer knob. PT Series knobs can be found on synthesizer modules from Make Noise, Mutable Instruments and others. Fits 6mm D-shafts.

• Height: 0.71 in
• Diameter: 0.73 in
• Fits 6mm D Shafts
• Indicator on round side of D-shaft

A variety of different sizes are available from the PT Series.

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet. These 1/8W resistors have a very small body and are great for tight builds.

Original 4-pin Fender jack. Fits Fender amplifiers from 1988 - 1999. PC mount.

• Direct replacement four-pin mono amplifier jack
• Includes lock nut and washer
• Fits Princeton® Chorus, Pro 185, BXR series, Stage™ 112SE, Ultimate Chorus™, Roc Pro™ Series, Performer series, Bronco™, '94 Twin®, Princeton 112+, Deluxe 112+, Automatic™ GT and Blues Junior™ amplifiers

PCB and parts kit for the Iss 2 fuzz built in the style of a BC108 Fuzz Face. This kit includes all of the resistors, capacitors, and transistors used on the included circuit board. For the BC108 style parts kit, a pair of BC108C transistors are included.

100kΩ dual-gang 16mm potentiometers with a T18 knurled shaft and an audio taper. These pots have right angle PCB mount terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Lead Depth from Panel: 10.7 mm + 5 mm (0.421” + 0.197”)
• Lead Distance from shaft center: 16 mm (0.630”)
• Lead Thickness: 0.5 mm (0.020”)

Low profile switches with a smaller footprint than the standard 3PDT sizes. These footswitches are perfect for cramped layouts but are also great for general use. The small solder lugs are great for wiring by hand that also work well with PCB layouts. Mounting hardware included. Features

• Latching Footswitch
• 3PDT
• Low Profile
• Small Solder Lugs
• Hardware Included

2 pole horizontal 1/4" jack, all contacts switched, gold plated contacts, chrome ferrule nut

Carling, SPST footswitch, Off-(On), momentary, normally open with screw terminals. Note: Off-(On) switches may sometimes be referred to as Off-None-(On).

Mini size terminal strips, 1/16" thick bakelite, tin plated steel solder lugs and brackets on 1/4" centers.

The 2N2907 is a silicon planar epitaxial PNP transistor in a TO-18 metal case type. The 2N2907 is designed for use in high speed saturated switching and general purpose applications.

High quality 22AWG wire from Weico featuring a topcoat of solder over the strands. This wire is pre-tinned in the sense that a coating of solder is already applied, bonding the individual strands together so no additional tinning is required.

Eyelets, bag of 10 (mounts in 1/8" hole).

Flat 0.01uF (10nF) film capacitor rated for 250V. Made of metallized polypropylene film, this capacitor is a great choice for audio applications. The style of this yellow capacitor is similar in appearance to the flat rectangular Philips 341 output caps found in original Fuzz Face pedals.

High quality Alpha 3PDT footswitch with solder lugs. The Alpha 3PDT is a great choice for a durable and reliable footswitch. Mounting nuts, washer, and lockwasher included.

• Bushing Length: 11.5mm
• Threading: M12 x 0.75
• Solder Lugs

2N5087 PNP Bipolar Junction Transistor in TO-92 package. For the NPN 2N5087 see P-Q2N5088

#20 solid copper wire with modern insulation and lacquered cotton braid finish. 105°C temperature rating, 600V. For a stranded version, see: S-W7XL

The Gorva C65 is a high quality powder-coated take on the Hammond 125B size enclosure with a focus on function and design. Features:

• Hammered charcoal powdercoat
• Slightly beveled top and rounded corners for high quality look.
• Tight fit and small gap between the enclosure and lid.
• Undercut boss allows more internal room for more flexible layout.
• Smooth, eggshell-like matte powder coating.
• Recessed bottom lid

Part of a limited run of hammered charcoal enclosures which includes: Enclosure SKU 1590B P-H1590BCE-HMT-CHC C65 (Gorva) P-H1590N1-GORVA-HMT-CHC 1590N1/125B P-H1590N1CE-HMT-CHC 1590TRPD Trapezoid P-H1590TRPB-HMT-CHC YY P-H-YY-HMT-CHC S90 (Gorva) P-H1590BB-GORVA-HMT-CHC 1590J P-H1590J-HMT-CHC

3PDT switch mounted charge pump PCB for positive ground effects. This small PCB simplifies the wiring of 3PDT foot switches in guitar pedals while also offering -9V when used with a standard +9V power supply. This is a great option for positive ground effects such as vintage fuzz pedals. The circuit of this PCB also features a protection diode and an LED indicator for when the effect is engaged.
This board is compatible with the MAX1044, TC1044S, TC7660S, and LT1054 charge pump ICs.

The AS394H is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.