Pedal Parts / DIY

Variety pack, 10 feet for each color. Great for color-coded wiring with smaller quantities. 600V stranded. Strands are tinned individually. See photos for detail. UL style 1015, rated to 105 degrees C. Perfect for new projects or rewiring any electrical equipment. 6 Pack (6 colors, 60 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue

​​9 Pack (9 colors, 90 total feet) includes:

• Black
• Red
• Green
• White
• Yellow
• Blue
• Orange
• Brown
• Purple

See S-W22 for 50 foot rolls of individual colors.

Mono input. Solder lugs, shorting. Metal ferrule, vintage style. Similar to S-H901-X.

100kΩ dual-gang 16mm potentiometers with a solid shaft and an audio taper. These pots have solder lug terminals. The smaller size is useful for builds with limited panel space such as guitar pedals, synthesizer modules, and adding modifications to equipment. Washer and nut included.

• Threading: M7 x 0.75
• Distance between terminals: 5 mm (0.197”)
• Bushing Length: 6.5mm (0.256")
• Shaft Diameter: 6.35mm ( 0.250")
• Taper: Audio (Log)

High quality single row machine pin sockets made by Preci-Dip. These sockets are the break-away type and can easily snap into smaller sizes such as 5 separate transistor sockets.

Cliff UK 1/4" white jack. External threading: 7/16-20. Ni-Ag® Alloy Self-Cleaning Contacts for superior performance and reliability. Tough, molded Nylon body.

J201 N-Channel JFET in a TO-92 package. The J201 is designed primarily for low level audio and general purpose applications with high impedance signal sources.

• Max drain to gate voltage = 40 V
• Max gate to source voltage = -40 V
• Max forward gate current = 50 mA

The AS3046 is Alfa’s version of the CA3046 IC in an SOIC package. The AS3046D consists of five general purpose silicon NPN transistors on a common monolithic substrate. Two of the transistors are internally connected to form a differentially-connected pair. The transistors are well suited to a wide variety of applications in low power systems. They may be used as discrete transistors in conventional circuits however, in addition, they provide the very significant inherent integrated circuit advantages of close electrical and thermal matching. The AS3046D is available in a 14-pin SOIC package. Features

• Matched pair of npn transistors
• VBE matched less than ±1 mV
• 5 general purpose monolithic transistors
• Wide operating current range

Applications

• Filters
• Custom designed differential amplifiers
• Temperature compensated amplifiers

Included in the PA-9ECB Basic Kit and also sold separately, the Cable-Grey allows the user to power vintage and boutique effect units that run off 9-volt batteries but do not have an external AC power jack. The Cable-Grey hooks directly to the unit's Battery Snap and can be connected to any of the Power-All daisy chains, or directly to the Power-All.

Original Crybaby replacement circuit board for pedals made after 1990. Original Dunlop replacement part.

Metal Film resistors consist of a resistive element of an extremely thin layer of metal alloy vacuum deposited on a substrate. Precise and quiet.

TL084 quad op amp in a 14-pin DIP package. These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage ( BI-FET II™ technology). They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The TL082 is pin compatible with the standard LM1558 allowing designers to immediately upgrade the overall performance of existing LM1558 and most LM358 designs. These amplifiers may be used in applications such as high speed integrators, fast D/A converters, sample and hold circuits and many other circuits requiring low input offset voltage, low input bias current, high input impedance, high slew rate and wide bandwidth.

Linear taper, vertical mount, Alpha pots with a 6.35mm shaft diameter. These 9mm pots are popular in DIY guitar pedals, synthesizers, and other projects. Mounting nut and washer included.

The TL072 is a high speed JFET input dual operational amplifier incorporating well matched, high voltage JFET and bipolar transistors in a monolithic integrated circuit. The device features high slew rates, low input bias and offset current, and low offset voltage temperature coefficient.

CD4016B Series types are quad bilateral switches intended for the transmission or multiplexing of analog or digital signals. Each of the four independent bilateral switches has a single control signal input which simultaneously biases both the p and n device in a given switch on or off. Features:

• 20-V digital or ± 10-V peak-to-peak switching
• 280- typical on-state resistance for 15-V operation
• Switch on-state resistance matched to within 10 typ. over 15-V signal-input range
• High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k
• High degree of linearity: <0.5% distortion typ. @ fis = 1 kHz, Vis = 5 Vp-p, VDD–VSS
• Extremely low off-state switch leakage resulting in very low offset current and high effective off-state resistance: 100pA typ.

The AS301AN is Alfa’s version of the LM301A in an 8 pin DIP package. The AS301A is a general purpose operational amplifier. This amplifier offers many features which make its application nearly foolproof: overload protection on the input and output, no latch-up when the common mode range is exceeded, and freedom from oscillations and compensation with a single 30 pF capacitor. It has advantages over internally compensated amplifiers in that the frequency compensation can be tailored to the particular application. For example, in low frequency circuits it can be overcompensated for increased stability margin. Or the compensation can be optimized to give more than a factor of ten improvements in high frequency performance for most applications. In addition, the device provides better accuracy and lower noise in high impedance circuitry.

Large black plastic control knob with set screw and brass insert. This distinctive pointer knob is similar to the selector knobs used on original MiniMoog and Moog modular synths. It features a triangular pointer, a radial brushed metal top, and a line indicator. The large skirt has a diameter of 1.125 inches. Fits ¼” (6.35mm) pot shafts.

Switchcraft ¼" Mono 2-Conductor Input Jack, Isolated Make Circuit (Type 13). Includes nut and washer

High-quality USA made knobs from Davies Molding. The large skirted 1550 pointer knob is made of solid phenolic and features a white indicator line. The pointer has an overall length of 1.19” and the skirt’s diameter is 1.13”.

• Height: 0.625 in
• Length: 1.19 in.
• Fits ¼" shaft with set screw

Heavy duty SPST Off-(On) momentary switch made in Italy by ST Professional. Rated for 2A at 240V, these switches can be used in a wide range of applications. The body is made of PBT that is riveted to the bushing plate for a sturdy construction. The actuation force is lighter than similar Carling momentary switches and provides tactile and audible feedback so the switching action is apparent to the user. The pins also feature eyelets so hardwiring is an option in addition to the standard PCB mount.

Uniquely shaped trapezoid Hammond enclosure. Screws included.

Atten TJ-228 soldering iron stand with adjustable mounting angle, sponge holder and solder spool stand. This stand is a great option for stand-alone soldering irons or as a replacement for a worn out stand.

Plastic chicken head knobs for coarse knurled shafts. These tiny chicken head knobs are great for pedal builds or cramped face plates. They feature an inlay indicator line. The total length of the chicken head is 0.93 inches. Fits T18 knurled shafts.

ECB233 boost / distortion kick switch. Original Dunlop replacement part. Used in the SW95 Crybaby Slash Wah. Through hole PCB mount.

R/A mono jack. Replacement for Fender amps 1999-present. Similar to Fender part: 005-1658-000