Switches

Carling, DPST 2 position toggle switch, On-Off. 10A 250VAC, 15A 125VAC. Made in Mexico. Note: On-Off switches may sometimes be referred to as On-None-Off.

.3A 125 VAC. 1 pole, 12 position, solid 1/4" shaft. SP12T rotary switch.

Rotary impedance selector. Modern, selects between 4Ω, 8Ω, and 16Ω. Panel mount from front side. SP3T.

Carling, DPST 2 position toggle switch, On-Off with .25" tabs (6A, 125VAC). Note: On-Off switches may sometimes be referred to as On-None-Off.

Carling, SPDT mini toggle with short actuator, 3 positions, ¼" mounting hole diameter, 0.354" bushing length.

• 0.354" bushing length
• 3-Position On/Off/On
• ¼" mounting hole diameter
• Single pole/Double throw (SPDT)
• Solder lugs

Carling mini-toggle switch, 3PDT, ideal for stomp boxes, phase switching, coil-tapping, series/parallel pickup switching in guitars.

• 0.354" bushing length
• 1/4" mounting hole diameter
• On-On Three pole/double throw (3PDT)

Tele style 3 position pickup selector switch. M3.5 x 0.80 mounting hole threading. Switch tip not included.

Carling mini-toggle switch, SPDT, Solder Lug, 3-Position, On/Off/On

Carling mini-toggle switch, DPDT, ideal for phase switching, coil-tapping, series/parallel pickup switching in guitars. This switch features a flattened actuator.

• 0.354" bushing length
• 2 Position On-On
• ¼" mounting hole diameter
• Double pole/Double throw (DPDT)

1A, 250V; 3A, 125V. Carling SPDT 2 position On-On toggle switch. Great Fender ground switch replacement.

3PDT latching footswitch. LED ring requires a 11/16" mounting hole. Foot switch button set screw requires 1.5mm hex key.

Genuine Carling DPDT 3-position mini toggle switch with solder lugs. These switches feature a flattened actuator.

• 0.354" bushing length
• 3-Position
• ¼" chassis hole diameter
• DPDT ( Double Pole/ Double Throw) switch
• Solder Lugs

Rotary impedance selector, 4/8/16. Body screws onto chassis hole. SP3T switch.

Carling, 2 position DPDT toggle switch with screw terminals. On-On. Note: On-On switches may sometimes be referred to as On-None-On.

Whether you need to replace a worn switch or just want to add a little tonal variety to your favorite instrument, Fender&reg offers this high quality, 5 position super switch with knob and mounting hardware.

Carling, DPDT 2 position toggle with solder lugs (6A, 125V), .50" toggle length (shorter bat). On-On.
Note: On-On switches may sometimes be referred to as On-None-On.

DIP slide switches with standard 0.1” (2.54mm) lead spacing. These small PCB mounted switches are used in many circuits such as mode settings in effects pedals. Specifications:

• Contact Rating: 100mA 50VDC
• Terminal: Brass with gold plating
• Dielectric strength: 500VAC 1 minute
• Insulation Resistance: 100mΩ min (500VDC)
• Electrical Life: 2,000 cycles per position
• Contact Resistance: 500mΩ max
• Mechanical Life :≥100,000 Cycles
• Operating Temperature :-25°C to +85°C

Carling mini-toggle switch, double pole/double throw, PC Pins. ¼" mounting hole diameter. 0.354" bushing length. 3-Position.

Black bat toggle switches with a similar style to the Arrow and Torotor switches found on many vintage Marshall amps. This On-Off SPST switch is rated for 230VAC, 4.5A. Includes one hex nut and one knurled nut.

SPST On-Off toggle switch. Made in Taiwan (M10 x.1.0 threading) .39" bushing diameter.

Premium quality latching 3PDT switches from DeMont / Guyatone. These made in Japan switches are designed specifically for audio signals. The Demont 3PDT has ultra-smooth switching action and has a very low actuation force. It uses gold plated solder cup terminals for solid connections with a professional look. Mounting hardware included.

Carling, DPDT 2 position toggle with solder lugs (3A, 125V), .50" toggle length. On-On. Dimensions:

• Body Length (less solder lugs) = 0.984"
• Body Depth (height) = 0.580"
• Body Width = 0.528"
• Toggle Length =.50"

Note: On-On switches may sometimes be referred to as On-None-On.

3PDT latching footswitch with PC terminals. Blue with 9 terminals. Made in Taiwan.

Carling miniature latching rocker switch, SPST, On-Off with .25" tabs. 0.48" x 1.072" mounting hole diameter, 16A, 125 VAC. Since its introduction, the Curvette switch has become the barometer for versatility and performance in the switch market. Self cleaning contacts and international approvals make the Curvette the switch of choice for many markets. Two color visi rocker to indicate “on” function. Patented mounting wings accommodate a wide range of panel openings.