Tools

Bob Smith Industries™ Insta-Cure+™ Medium Gap Filling Cyanoacrylate. A must have for luthiers! Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps or the parts to be glued don’t fit perfectly. Medium viscosity super glue is the most common glue used in many luthiery applications due to it’s cure time and viscosity. Recommended for binding repair and small poly finish touch ups. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out. To speed up curing time use the Insta-Set accelerator!

Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.

Genuine Weller screw driver (chisel) style tips for use with all ST Series compatible soldering irons. The screwdriver style is great for soldering through hole components and many other situations. The flatted tip makes it easy to make contact with both the solder pad and component lead. These tips are an excellent choice for use with the S-TWLC100 soldering station.
For use with Weller Irons: SP40N, WP25, WP30, and WP35; and WLC100 station

Bob Smith Industries™ Insta-Cure™ Super Thin Cyanoacrylate. A must have for luthiers! Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds (1-3 sec.). Surfaces to be bonded must be tight fitting (no visible gaps) and should be held together or clamped while you apply the CA around the edges of the seam. For glue applications with small gaps or looser fitting joints the higher viscosity Insta-Cure+™ is recommended.

• Water-thin consistency
• 1-3 second cure time
• For tight fitting applications
• Available in 1oz. and 2oz. sizes

WARNING: These products are eye and respiratory irritants. Product can bond skin instantly. Keep away from children!

Stainless steel strip, microscored to an ultrafine file surface. Remove oxide and corrosion on contacts made of platinum, paladium, moybdenum, gold, tungsten, and silver.
Commonly used to remove oxidation from electronic contact surfaces such as switches or connectors, restoring the connection and revitalizing the surface.

The Better Setter tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. The U-shaped slot is fitted around the pot shaft and the adjustable straight edge is then aligned and set to the edge of the enclosure. The two white lines on the U-shaped slot can then be used to set the knob to the beginning or end of the pot’s travel. Works best with 7mm bushing potentiometers.

5" Overall Length, 3/4" Jaw Length. Great for cutting wire and component leads, etc. Product Features:

• Low profile, general-purpose cutter
• Superior blade by-pass shear cutting action
• Better cuts with half the effort
• Greatly reduced mechanical shock delivered to the work
• Features red grips
• Flush cuts soft wire up to 20 AWG (0.8mm)

Bob Smith Industries ™ Extender Tip for CA glues. This extender tip can be used with all viscosities (Thin,Medium,Extra Thick) of cyanoacrylate that we offer from Bob Smith Industries™ and is compatible with both available sizes (1oz and 2oz) Extender tips can help you reach difficult spaces and control the flow of glue for more precise application.

• Helps focus glue stream
• Works with all three CA glue viscosities
• Package of 6

Fits any adjustable drill or adjustable screwdriver. One size for: guitars, bass, banjos, mandolins, steel guitars, dobros, jazz boxes, etc.

• Precision molded solid body
• No more manual winding ... string your instrument in minutes!
• Direct drive to the tuning keys
• Plastic, will not scratch tuner buttons.
• The ultimate restringing tool for effortless string replacement

Color pictured is an example. Actual color may vary

2 oz clear jar with a white cap. Instant identification for your parts, liquids or dry goods. Super wide mouth for easy filling.

• Durable polystyrene jars.
• FDA compliant.
• Caps included.

High quality Phillips head truss rod wrench. This Japanese made wrench is the perfect tool for cross slotted truss rod nuts found on many Fender® necks. The compact 9mm diameter head has a thin 11mm width allowing for adjustments without removing the neck

Instructions

• Simply drill 3/8" hole insert cutting head and compress handles.
• Gives you the ability to make square holes for fuse holders, special connectors displays etc.

1. Material to be nibbled is placed in the gap between the punch and blade channel.
2. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
3. A scribe line can be followed by looking down on work in this position.

Padboard featuring a 0.15” vintage spacing. This spacing is great for vintage-style builds and more easily accommodates axial capacitors and other larger sized vintage parts like resistors and transistors. The board has a 20x10 grid of pads and easily fits into 1590BB style enclosures and larger vintage-style fuzz enclosures. Each square pad is HASL coated making soldering easier than most protoboards and also ensures a long shelf life. Features:

• High-quality 1.6mm FR4 glass-epoxy circuit board
• 1oz/ft2 copper weight
• HASL coated square shaped pads
• 20 x 10 holes
• 3.04” x 1.55”

Bourns trimmer adjustment tool. This tool is compatible with both the R-VT96Y-X multiturn trimmers and the R-VT62P-X single turn trimmers. The recessed end is especially helpful when used with the 3296Y trimmers to avoid slipping off of the screw adjuster. Features

• Meets UL 94V-0
• Pocket clip
• For use on most trimmer shafts/rotors
• Recessed end for use with extended shafts
• RoHS compliant

(63/37 Rosin Core) - ..031" Diameter, 1 lb Spool, contains lead alloy. Kester 44 Rosin Flux is an activated rosin formula for use in flux-cored solder wire. Kester 44 Rosin Flux has virtually dominated the field of activated rosin core solders for well over four decades. An outstanding performance feature of this flux is the “instant-action” wetting behavior.

Edge cut nut files in popular gauges specially designed for slotting nuts. These files cut a smooth, round bottom slot. Also great for slotting tune-o-matic bridge saddles! Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.

• 4.5” cutting edge
• Double sided (both sides are the same gauge)
• 10 gauges available
• Sold individually*
• Made In Japan

*See S-T213-SET for a set of all 10 sizes.

Replacement top that is on all of BSI's non-Pocket CAs. Perfect for replacing damaged tops on any of the CA glues. These tops can be soaked in acetone overnight to remove any buildup of CA on the inside and outside of the nozzle. Compatible with S-F500,S-F501, S-F502, S-F503, S-F504, S-F505, S-F550, S-F551, and S-F540.

1.4m, Self adhesive type, 64mm width for S-T229-X sanding blocks.

A specialized tool for cleanly pulling out frets. The narrow jaws are designed specifically to allow for a clean grip on frets. The special flush ground 1/2" jaws can easily bite the frets without damaging the fretboard.

Prototyping circuit board with a standard long strip pattern where tracks run the length of the board. The long tracks are convenient for power and ground rails, and for signal buses. Strips can be cut as needed to make smaller tracks and circuit pads and the board has 0.1" hole spacing for DIP integrated circuits/ headers as well as other parts. Higher quality than traditional stripboard, the holes are drilled, not punched.

Restore the performance of your soldering iron by replacing the tip. Replacement for S-TWP35 and S-TWLC100.

• ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WP25, WP30, WP35, WLC100 series tools
• Precision ground copper tips are plated with iron, nickel and chromium
• ST7 - .031" / 0.79 mm diameter Conical tip
• Tinned with Lead Free alloy

Bias Master™ system BM4 Measures Bias current of the vacuum tubes in your amp. Includes 4 probes and english/german operation manual. The Bias Master™ allows you to monitor the bias current safely and easily. While adjusting the Bias control pot of your amp, the Bias Master™ shows the actual result. This lets you set and evaluate the full reasonable biasing range your amp and tubes offer to find and set your personal perfect choice.

Low residue, no-spill. Thermal stability enabling excellent wetting and reduced carbonization at soldering temperature. No-clean flux can be removed by wiping with a cloth or with cleaning solvent. Nonflammable and non corrosive. Recommended for electrical and electronic soldering applications.

Coiled metal wire type tip cleaner for use with soldering irons. The metal wire cleaner requires no water which reduces temperature drops in the tip compared to using a sponge. The black metal holder is dome shaped to reduce airborne solder droplets when cleaning. The holder has a detachable top and bottom to easily empty when necessary.