Tools

Chisel - Flat, Japanese, Steel, Tataki-Nomi
High quality made in Japan flat chisels for luthier work. These chisels have a blade hardness of HRC63 and a total length of 225mm. The hardwood handle features a flat end for hammering,
Please Log In to view prices
Adhesive - Bob Smith Industries, Insta-Set Foam, Pump Spray
Bob Smith Industries INSTA-SET™ CA (super glue) Accelerator. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
  • Convenient pump spray (2oz.
Please Log In to view prices
String Spreader - for fret work without unstringing
Those of us who don’t want to fully remove that new set of strings to do some quick spot work on the fret board or nut will love this simple yet effective tool. Simply loosen your strings and place the string spreaders underneath the guitar neck. Bring the strings off the neck and latch them underneath the spreader's ends to allow for quick and easy fret-board work without the need to unstring your instrument. These string spreaders will quickly become a must have in your toolbox!
  • Make room for cleaning, polishing or spot work on frets without removing strings
  • Made of brass with a soft, finish safe, rubber coating
package of 2
Please Log In to view prices
Fret Polishing Rubber - Erases Fine Scratches & Marks
Make your frets shine with this fret polishing rubber. Erases fine scratches and marks. Set of 2. Because of the softness of the rubber, the polisher fits to fret arch perfectly and keeps the fingerboard damage to a minimum. Easy to cut for delicate fret work. This is a great rust remover and polisher!
Available in 1000 (tan), 400 (red), or 180 (blue) grit.
package of 2
Please Log In to view prices
Guitar Setup Mat - Dunlop, System 65
Work on your guitars without the worry of scratching the finish. This thick neoprene mat measures 17 7/8” x 23 ¾”. The tight webbing on the surface ensures no marring and helps keep debris from sticking to the mat.
Please Log In to view prices
Adhesive - Bob Smith Industries, Maxi-Cure Extra Thick
Bob Smith Industries ™ Maxi Cure ™ Extra Thick Gap Filling Cyanoacrylate. A must have for luthiers! Maxi Cure ™ is the highest viscosity CA we have available and is great for extreme gap filling and finish fills. It can be carved with a knife or razor blade and sanded and feathered to form a finish which makes it great for chip repairs. The extra thick viscosity of Maxi Cure ™ also allows longer repositioning time than other glues (10-25 sec.) Apply Maxi Cure ™ in a coil pattern to one of the parts to be glued, spread glue evenly, then assemble parts. Hold or clamp firmly for 30-60 seconds. To speed up curing time use the Insta-Set accelerator! (S-F506)
Please Log In to view prices
String Action Gauge - Measurement Tool
A stainless steel pocket-sized String Action Gauge that's perfect for obtaining quick and accurate action measurements for acoustic and electric instruments. A must have in a busy repair shop! Measurements taken using this gauge include:
  • Saddle height/slot depth
  • String height
  • Nut height/slot depth
  • Pickup pole piece height/string to pole piece distance
  • Fret slot depth(unbound fingerboards only)

Plus more! The back includes a useful fraction/metric/decimal conversion chart that saves you time. Available in metric or in imperial models (sold individually)
Please Log In to view prices
Radius Gauges - 2 Gauges for 8 Radiuses
Solid, high quality stainless steel radius gauges. Use during fingerboard/fret shaping to accurately measure your progress and eliminate mistakes. Can also be used when shaping a nut/saddle or when setting string radius at the bridge. Great for working on compound radius necks. This is an essential tool for a luthier/tech’s bench.
  • Gauge 1 has 7.25", 9.5", 10", and 12" radiuses
  • Gauge 2 has 14", 15", 16", and 20" radiuses
  • Set of 2
package of 2
Please Log In to view prices
Knob & Bushing Puller - for Easy Removal From Guitar
The Knob and Bushing Puller's clear acrylic housing has a rubberized base to help protect the guitar's finish. The square unit has 2 ends- one end for pulling knobs, the other end can work with the attached hardware to easily extract Gibson, Schaller or Gotoh bridge and tailpiece stud bushings, without damaging the guitar Includes 6 bolts and 2 flat washers for pulling various bushing threads:
  • 5/16-20
  • 5/16-24
  • 5/16-18
  • 10-32
  • M5
  • M6
  • M8

Roughly 0.065" clearance between the bottom of the knob and the top of the guitar required for knob puller attachment.
Please Log In to view prices
Magnetic Parts Tray - Dunlop, System 65
Keep all of your parts in one place with this magnetic tray. 4” diameter across the top rim and 2.5” diameter on the base.
Please Log In to view prices
Fret Setter - 10 cm long, for reseating without unstringing
The contact surface of this solid brass tool fits over the crown of a fret and reseats loose fret ends without unstringing the instrument. Place the end of the tool on the crown of the fret and tap with a hammer. Also works well for pressing loose fret ends down while supergluing.
Please Log In to view prices
File - Fret Crowning, Hard Chrome Coated, for Stainless Steel Frets
Hard chrome coated fret files for crowing stainless steel frets. Each file features a coarse and fine file indicated by the arrows pointing up and down. The larger arrows point to the coarse side and the smaller arrows point to the fine side. The horizontal arrows indicate the cutting direction of the file.
  • Hard chrome coated
  • Single cut files
  • Coarse and fine included on each file
  • Medium file has a radius of 2mm
  • Jumbo file has a radius of 3mm
Please Log In to view prices
Notched Straightedge - 16.5" x 1.5", Stainless Steel, Satin
The notched straight edge is a must have on any luthier’s bench for evaluating the straightness of your fret board while avoiding frets that may have seen better days.It’s made of satin stainless steel so cleaning off any markings made with a pencil is a breeze!
One side is marked Long Scale Guitar for use with Fender, Martin, Gibson long scale guitars plus others.
The opposite side is marked Short Scale Guitar for use with Gibson’s shorter scale as well as Dobro and PRS guitars plus others.
Please Log In to view prices
Fret Slotting Miter Box - for guiding fret saws
Use this Fret Slotting Miter Box to accurately cut fret slots with a fretting handsaw. The ball-bearing guides make sawing easier and faster; they hold your fret saw perpendicular to the fingerboard and can be adjusted to match the blade precisely. You can quickly slot any board up to 3"" (76.2mm) wide, with adjustable depth of cut for any fret wire. You always have an unobstructed view of your work.
Made of rugged aluminum and 12" (304.8mm) long, this miter box has convenient mounting holes for firm attachment to your workbench, the mounting screws and spanners are included. Instructions also included.
Please Log In to view prices
Fret File - for Filing Fret Ends, pencil shape
Made in Japan. File specially designed for fret end work. Used for rounding fret ends and deburring. Size small = 1 mm for small frets. Size medium = 2 mm for medium frets. Size large= 3 mm for large frets.
Please Log In to view prices
Two-Way Sanding Block - for Fretboards
Two-way sanding block for radius fretboard sanding. There are two different radiuses on each block. Sandpaper not included.
Please Log In to view prices
Fret Bender - for creating radius in or flattening Fret Wire
Multi-functional Fret Bender - bend or staighten either bulk fretwire or pre-cut short piece fret wire precisely and quickly! For bending fret wire, crank a length of fretwire through the fret bender, and it comes out curved and ready to install in a radiused fretboard. Get a perfect bend on enough wire for a whole guitar in just seconds. Precisely radiused fretwire makes your fretwork fast, accurate, and professional.
Can be mounted to a workbench by using the two 5/16” bolt holes.
Please Log In to view prices
Fret Press - Handheld, 4 cauls, for seating frets
Handheld fret press is a professional fretting tool that gives you finer control over the pressure needed to seat a fret into the slot - you can actually feel it seating! It eliminates complicated clamping setups, so your press-in fret jobs go faster. There's a self-leveling upper caul that adjusts easily to any neck. Used with radius inserts (S-T261) to press frets into guitar fret boards. This method is preferred by many as an alternative to hammering the frets in. Includes 4 interchangeable support cauls.
Please Log In to view prices
Fret Press Caul - Converts Drill Press to Fret Press
Fret press caul. Perfect for converting your drill press or arbor press into a fret press. 3/8” shank. (Includes 2.5 mm hex key).
Used with radius inserts (S-T261) to press frets into guitar fret boards.
Please Log In to view prices
File Set - Needle files, 5 types, for precision work
Set of files for precision work.
Includes:
  • flat
  • half round
  • round
  • square
  • three square (i.e. triangular)
package of 5
Please Log In to view prices
Fret Saw - Standard Model, for cutting fret slots
Standard fret slot cutting saw with 0.50/0.60 mm pitch. Made in Japan. Overall length = 324 mm (12 ¾”) Cutting Length = 115 mm (4 ½”) Blade Depth = 30 mm (1 3/16”)
Please Log In to view prices
Scraper Set - 120mm x 44mm, Standard Set of 2
Luthier tool, set of 2 scrapers for wood working. 0.4mm thickness.
package of 2
Please Log In to view prices
Radius Gauges - Notched, stainless steel
Solid, high quality stainless steel radius gauges, notched version. Use during fingerboard/fret shaping to accurately measure your progress and eliminate mistakes. Can also be used when shaping a nut/saddle or when setting string radius at the bridge. Great for working on compound radius necks. This is an essential tool for a luthier/tech’s bench. Narrow gauges are used for measuring at the nut to the 7th fret, while the wide gauges are used for measuring at the 7th and higher numbered frets.
  • Gauge 1+2 has 7.25", 9.5", 10", and 12" radiuses
  • Gauge 3+4 has 14", 15", 16", and 20" radiuses
  • Notched version great for taking measurements with strings on
  • Set of 4
package of 4
Please Log In to view prices
Saddle File - for Acoustic Guitar Saddle Slots
File for use in filing the saddle of acoustic guitars. Available in 2mm or 3mm options.
Please Log In to view prices