Tools

Soundhole and Rosette routing jig. Adjustable from 2” diameter to 6” diameter. Includes two hex adjustable M4x0.70 countersunk screws for attaching a router base, one registration pin (4 mm diameter) and three hex keys: 2.5 mm, 2.0 mm, 1.5 mm. Use with precision router base support for Dremel tool (S-T235).

Handheld desoldering pump for solder removal. The enhanced dual spring-loaded piston creates a powerful vacuum for easy removal of molten solder. The static free tip is self cleaning and made from a clog resistant material. The aluminum body is lightweight and durable.

This 12 inch ruler is a durable straight edge for measuring, marking and cutting. Made of flexible stainless steel with non-slip cork back. Includes wear resistant etched markings in inches, cm and mm.

• 12" Stainless Steel Ruler
• Nearly indestructible, warp-free, bend-resistant stainless steel ruler
• Etched with 1/16 and metric markings to ensure easy readability
• Flexible for measuring curved surfaces
• Non slip cork backing
• Numerals and graduations are sharply delineated
• Attractive finish fits right into modern office environments

Genuine Weller screw driver (chisel) style tips for use with all ST Series compatible soldering irons. The screwdriver style is great for soldering through hole components and many other situations. The flatted tip makes it easy to make contact with both the solder pad and component lead. These tips are an excellent choice for use with the S-TWLC100 soldering station. Sold in a pack of three. ST Series Tips: Will fit the SP40L / SP40N series irons as well as the WLIR60, WLIR60K, WP25, WP30, WP35, WLC100 series tools.

Multi-use tool oil for both maintaining and using tools. This rust-preventive oil can be used to lubricate tools such as hinges on pliers. It can also be used to thinly coat metal tools to avoid future corrosion. Additionally, it can be used as a cutting and filing lubricant when slotting a nut for a guitar, slotting bridge saddles, and other cutting purposes. The 15ml bottle features a needle dropper tip.

Seizer forceps. Product Features:

• Versatile tool with unusual holding qualities
• Clamps firmly to hold wires for soldering
• Acts as a heat sink and retrieves small parts from hard-to-reach places
• Precision-machined from perfectly tempered stainless steel
• Box-joint construction
• 3-position snap lock
• Serrated jaws

Replacement spring for S-TCN255 (Xcelite curved nose pliers).

Small magnetizer / demagnetizer for use with hand tools. Simply pass a tool such as a screwdriver through the square hole to magnetize the tool and pass it through the u-shaped channel to demagnetize the tool. Note: When passing through the square cutout to magnetize a tool, be sure to keep the tool from touching the four walls of the magnetizer to ensure a proper magnetization. When using the demagnetizer, the tool can touch the plastic of the channel.

Blue outdoors painter's tape. Resists direct sunlight. Holds up to 14 days with clean removal. Recommended for detailed paint jobs.

Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:

• 8282 Zenith type Hex/Screwdriver
• 8606 5" Hex wrench
• 9091 Hex iron core tool
• 9300 5" Double sided hex tool
• 9304 Hex screwdriver combination
• 8608 Potentiometer Adjustment Tool

Prototyping circuit board (PCB) designed to fit the Hammond 1590B die-cast aluminum enclosure. It has a convenient 2-hole pattern, which provides an easy way to connect parts while maximizing usable board area. It can be used as a stand-alone prototyping board, or installed in a Hammond 1590B enclosure. For fastening your project to a surface see our adhesive standoffs (S-H190) Features:

• Single-sided high-quality FR4 glass-epoxy circuit board.
• Convenient 2-hole pattern provides an easy way to connect parts.
• 1oz/ft2 copper with an anti-tarnish coating for easy soldering. Lead free and RoHS compatible.
• 0.042" holes are drilled on 0.1" (2.54mm) centers. 2 mounting holes.
• PCB Size 2.05 x 4.05 in (52.1 x 102.9 mm)

Edge cut nut files in popular gauges specially designed for slotting nuts. These files cut a smooth, round bottom slot. Also great for slotting tune-o-matic bridge saddles! Always try and use a file gauge that’s not more than a couple thousandths larger than the gauge of string you are using. Smaller files can be used to create wider slots by using a side-to-side movement while cutting.

• 4-1/2” cutting edge
• Double sided (both sides are the same gauge)
• Set of 10 files
• Made In Japan

Set contains one of each size:

• 0.010"
• 0.013"
• 0.016"
• 0.024"
• 0.028"
• 0.032"
• 0.036"
• 0.042"
• 0.046"
• 0.056"

This stainless steel radius gauge can measure six different radiuses as well as fret crown heights and string action height. Overall size 210mm x 25mm
Includes

• 7.25"
• 9.5"
• 10"
• 12"
• 14"
• 16"

Antistatic wrist strap with a banana plug connector and alligator clip attachment providing a variety of attachment options. This wrist strap is a great tool for handling static sensitive components. Features

• Strong anti-static properties
• High safety performance
• Lightweight thermoplastic construction
• Thin and soft elastic wrist band for a comfortable fit
• Wrist band can detach from cable

• Relieved tapered head-flush cutter
• Allows use between closely spaced components
• Features blue cushion grips

This Luthier's Digital Caliper has a custom jaw notch for accurately measuring fretwire crown height (the height above the fretboard). This is essential for comparing new wire to original wire. And there's a notch on the depth gauge to measure fret height on the instrument.

• Measures fret height before AND after fret installation
• Accurate readouts in inches or millimeters
• A must for all precision guitar work

Diagonal cutters with an attachment for catching cut leads. This set of cutting pliers is made from high quality carbon steel with a hardened finish. The catcher can also be removed for use with vacuum attachments.

Comfort grip marker with a soft, rubber handle for excellent grip and control. This fine tip permanent marker has low odor and is non-toxic. Instant-drying.

Gear duster from Befaco. The Befaco Synth Duster is a great tool for getting dust off of faceplates and other hard to reach spots on your equipment. The super soft bristles can gently clean around pots, jacks, and other hardware.

Black stripboard featuring a 0.15” vintage spacing. This spacing is great for vintage-style builds and more easily accommodates axial capacitors and other larger sized vintage parts like resistors and transistors. The board has 40 x 20 holes (20 strips). Each strip is HASL coated making soldering easier than most protoboards and also ensures a long shelf life. Features:

• High-quality 1.6mm FR4 glass-epoxy circuit board
• HASL coated strips
• 40 x 20 holes (20 strips)
• 6.14” x 3.15”

Looking for projects? See our Wide Stripboard projects in our Pedal Layouts & Build Guides section for ideas.

Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning. This lightweight desoldering pump has an anodized aluminium body to assure durability and features a plunger safety shield, short-stroke plunger and a no-clog automatic tip cleaner. Replace tip with S-T7875B. Made in Taiwan.

600 grit diamond-plated file. 3 different, (small, medium, large) radiuses in one file. 130mm file length, 230mm total.

Coiled metal wire type tip cleaner for use with soldering irons. The metal wire cleaner requires no water which reduces temperature drops in the tip compared to using a sponge. The black metal holder is dome shaped to reduce airborne solder droplets when cleaning. The holder has a detachable top and bottom to easily empty when necessary.

Electrical tape for splicing and insulating wires up to 600V. Rubber adhesive with soft polyvinyl chloride film backing. UL Listed.