Tools

Keep all of your parts in one place with this magnetic tray. 4” diameter across the top rim and 2.5” diameter on the base.

The Dunlop System 65 Gig Light is a high lumen, road ready flashlight. At 3.7” in length it easily fits in a gig bag or pocket and can be safely secured with its metal belt clip. This flash light has three different modes that can be accessed by lightly tapping the power switch: high beam, low beam, and strobe. The beam can also be focused by adjusting the lens providing up to 100 yards of visible light with a tight focus. This waterproof flashlight runs on a single AA battery which is included.

The Dunlop System 65 Multi Tool is a compact tool that can cover the gamut of setup work for guitars and basses. Whether it’s a pickup height issue, truss rod adjustment, or a tweak in the action, this multitool can do it all.

The Dunlop System 65 Uni-Wrench is great tool for tightening and loosening any threaded nut on a guitar or bass. This includes pots, jacks, bridge posts, rounded knurled nuts on selector switches and more.

The Dunlop System 65 String Action Gauge is a precision measurement tool for setups and adjustments. The gauge includes both metric and imperial measurements on opposite sides.

The Dunlop System 65 Fret Collars include everything you need for a quick fret polish without the need for taping the entire neck. Two sizes of flexible steel collars are included, 0.125 and .080.

The Dunlop System 65 Screwdriver is the perfect small sized tool for a gig bag or case. The four bits include two different Phillips heads and two different flat heads which can cover almost any screw used on guitars and basses.

The Compact String Cutter delivers enough pounds per square inch to cut through just about any string. Don’t let the diminutive size fool you. The Compact String Cutter is made from chromium-vanadium steel with a laser-cut edge for strong, precise cuts.. Dunlop even tested it on a .160-gauge bass string, and the cut was fast and clean. This tool will do all the hard work for you—just give it a squeeze, and let that laser-cut edge do its thing. Keep a Compact String Cutter in your gig bag for quicker and easier string changes.

5 1/2" Overall Length, 1 1/2" Jaw Length Product Features:

• Thin profile, long reach pliers
• For access into tight spaces
• Lightweight for maximum comfort
• For use in precision electronic assembly applications
• Features serrated jaws
• Features red grips

Hard chrome coated fret files for crowing stainless steel frets. Each file features a coarse and fine file indicated by the arrows pointing up and down. The larger arrows point to the coarse side and the smaller arrows point to the fine side. The horizontal arrows indicate the cutting direction of the file.

• Hard chrome coated
• Single cut files
• Coarse and fine included on each file
• Medium file has a radius of 2mm
• Jumbo file has a radius of 3mm

Made in Japan. Files specially designed for fret dressing and fret end work. Used for rounding fret ends and deburring. The hard chrome coating used on these files allows for use on both standard fret materials as well as stainless steel frets.

• Size Medium = 2mm radius for medium frets.
• Size Jumbo = 3mm radius for jumbo frets.

Hard chrome coated fret file for leveling stainless steel frets. This two sided file features the same cutting pattern on each side.

• Hard chrome coated
• Two sided
• 6.25” x 1” x 0.225”

Seizer forceps. Product Features:

• Versatile tool with unusual holding qualities
• Clamps firmly to hold wires for soldering
• Acts as a heat sink and retrieves small parts from hard-to-reach places
• Precision-machined from perfectly tempered stainless steel
• Box-joint construction
• 3-position snap lock
• Serrated jaws

Set of 10 Jumper Test Leads " Alligator Clips 35mm each. Total Length 24", 22AWG wire. Black, Red, White, Yellow, Green

ANSI Z87.1+ rated eye protection. These safety glasses have scratch resistant lenses with UV protection.

Removes melted solder by suction. Facilitates accurate printed circuit repair and cleaning. This lightweight desoldering pump has an anodized aluminium body to assure durability and features a plunger safety shield, short-stroke plunger and a no-clog automatic tip cleaner. Replace tip with S-T7875B. Made in Taiwan.

Restore the performance of your desoldering pump by replacing the tip. Replacement for S-T7874B.

Instructions

• Simply drill 3/8" hole insert cutting head and compress handles.
• Gives you the ability to make square holes for fuse holders, special connectors displays etc.

1. Material to be nibbled is placed in the gap between the punch and blade channel.
2. By squeezing the handles together, the punch will move down into the channel, cutting out a slug of metal.
3. A scribe line can be followed by looking down on work in this position.

Butyrate shaft 6-1/8" long with 1/8" wide steel tips. Tip on one end recessed.

• Material: Conductive Nylon Metal
• End: 1/8"
• End 2: 1/8"

Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:

• 8282 Zenith type Hex/Screwdriver
• 8606 5" Hex wrench
• 9091 Hex iron core tool
• 9300 5" Double sided hex tool
• 9304 Hex screwdriver combination
• 8608 Potentiometer Adjustment Tool

Atten T900 soldering iron tips. The bent conical style is great for hard to reach connections. The bent tip allows access to these connections and reduces accidental burning of other components. These tips are an excellent choice for use with the S-ST-2090D soldering station and S-ST-2065D soldering iron.

Atten T900 soldering iron tips. The conical style is great for all types of soldering. The pointed tip works well with small connections and the expanding cone shape allows for use with larger connections such as solder lugs. These tips are an excellent choice for use with the S-ST-2090D soldering station and S-ST-2065D soldering iron.

Atten T900 soldering iron tips. The hoof style is great for soldering through hole components and many other situations such as SMD soldering. The flatted cylindrical tip is perfect for drag soldering surface mount components. These tips are an excellent choice for use with the S-ST-2090D soldering station and S-ST-2065D soldering iron.

Atten T900 soldering iron tips. The screwdriver or chisel style is great for soldering through hole components and many other situations. The flatted tip makes it easy to make contact with both the solder pad and component lead. These tips are an excellent choice for use with the S-ST-2090D soldering station and S-ST-2065D soldering iron.