Tools

Genuine Weller long screw driver (chisel) style tips for use with all ET Series compatible soldering irons. The long screwdriver style is great in situations where additional length is required or for narrow places. These tips are an excellent choice for use with the S-TWE1010 soldering station.

Stripboard made with a phenolic substrate. Phenolic boards are found in many vintage electronics before the use of fiberglass became common. This stripboard features standard 0.1” (2.54mm) spacing. The board has a 30x15 grid (15 strips) and easily fits into 1590BB style enclosures and larger vintage-style fuzz enclosures. Each strip is gold coated making soldering easier than most protoboards and also ensures a long shelf life. Features:

• High-quality 1.6mm phenolic circuit board
• Gold coated strips
• 30 x 15 holes (15 strips)
• 3.04” x 1.55”

Electrostatic Discharge Safe. Designed to maximize efficiency and production. Fast turning swivel cap with cavity provides precise centering. Constructed of superior strength materials. Product Features:

• ESD safe to provide protection to ESD sensitive items
• Chrome-molybdenum vanadium steel blades provide superior strength
• Fast turning swivel caps provides optimum control for precise centering
• Black oxide tips for longer wear life
• No-roll handle design keeps drivers from rolling off uneven surfaces
• Storage case provides a home and keeps drivers safe

Bias Master™ set of adapter probes for testing other types of tubes. For use with the S-TBM4-X Bias Master™ system.

IC-LOC™ Purple prevents loosening of small fasteners from normal use and vibration, but parts can still be disassembled with hand tools. IC-LOC™ Purple seals and prevents rusting of threads. Uses

• Threads of fasteners
• Bolts
• Screws
• Nuts

Directions: Shake well. Unscrew cap and cut off tip. Apply IC-LOC™ Purple to clean and dry threaded areas before assembling non-plastic parts. Product sets in 10 minutes, with full cure within 24 hours. IC-LOC™ Purple is anaerobic and cures in the absence of air, which occurs when a bolt, screw or nut is tightened. Cured temperature range is -60° to +300°F (-51° to +149°C). May attack some plastics. Remove residue with a damp cloth. Similar to Loctite Purple.

Low residue, no-spill. Thermal stability enabling excellent wetting and reduced carbonization at soldering temperature. No-clean flux can be removed by wiping with a cloth or with cleaning solvent. Nonflammable and non corrosive. Recommended for electrical and electronic soldering applications.

Atten TJ-228 soldering iron stand with adjustable mounting angle, sponge holder and solder spool stand. This stand is a great option for stand-alone soldering irons or as a replacement for a worn out stand.

Genuine Weller narrow screw driver (chisel) style tips for use with all ET Series compatible soldering irons. The narrow screwdriver style is great for soldering in hard to reach and narrow spots. These tips are an excellent choice for use with the S-TWE1010 soldering station.

• Sensor hole in the base of tip is fitted with a stainless steel liner
• Prevents the tip from seizing to the sensor

150mm length. Used to record the shape of a surface, which can then be used to trace a copy onto another surface. Needles are held firmly, which makes them easy to shape, but they remain in place when using to trace.

High quality made in Japan flat chisels for luthier work. These chisels have a blade hardness of HRC63 and a total length of 225mm. The hardwood handle features a flat end for hammering,

Lid for 1 quart mixing container. Seals container and prevents spills. High-density polyethylene. Use with S-TMIX-1 (sold separately).

This precise set of 20 feeler gauges in the luthier's workshop can perform a wide variety of functions to measuring with string action to measuring the correct nut slot depths, fret slot width, string to fret clearances, and other hardware installation work, these ground steel feeler gauges are marked in both metric and imperial measurements for easy use.

The Better Setter tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. The U-shaped slot is fitted around the pot shaft and the adjustable straight edge is then aligned and set to the edge of the enclosure. The two white lines on the U-shaped slot can then be used to set the knob to the beginning or end of the pot’s travel. Works best with 7mm bushing potentiometers.

Temporary Heat Sink. Absorb & dissipate heat during soldering/desoldering sensitive parts. Made in Taiwan.

Make your frets shine with this fret polishing rubber. Erases fine scratches and marks. Set of 2. Because of the softness of the rubber, the polisher fits to fret arch perfectly and keeps the fingerboard damage to a minimum. Easy to cut for delicate fret work. This is a great rust remover and polisher!
Available in 1000 (tan), 400 (red), or 180 (blue) grit.

Genuine Weller single flat style tips for use with all ST Series compatible soldering irons. The single flat style is versatile tip style that works great in situation where precision is required as well as situations where heat needs to be spread efficiently. These tips are an excellent choice for use with the S-TWLC100 soldering station.
For use with Weller Irons: SP40N, WP25, WP30, and WP35; and WLC100 station

ANSI Z87.1+ rated eye protection. These safety glasses have scratch resistant lenses with UV protection.

Ergonomically designed. Uses one 9V battery, included.

• 0.5% basic DC accuracy
• audible continuity test
• 3 1/2 digit LCD, 0.625" high
• 10M ohm input resistance
• 1.5" x 3" x 7.5"(w/o rubber case)
• overload protection
• voltage to 1000VDC, 750VAC
• capacitance to 20 microfarads
• polarity indicator
• frequency to 10MHz
• over range indicator
• 10A (AC or DC)
• low battery indicator
• hFE and diode test
• tilt stand and case

Solderable PC BreadBoard enables you to transfer your circuit and wires from a plug-in breadboard without recutting wires or changing your layout. This breadboard has the same pattern as a standard 400 connection point solderless plug-in breadboard which has a standard 5-hole strip for each IC pin, just like solderless breadboards. However, it has the advantage that soldered joints provide a more reliable long-term connection than solderless contacts. The board has four power rails like solderless breadboards, plus two bonus rails for power or signals. There are bonus two-hole pads along the centerline allowing DIL (dual in-line) headers to be used as well as a top side silkscreen to position components. Four mounting holes allow your projects to be secured.

IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as Max-Cure™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL™ can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL™ that you want. IC-GEL™ is an excellent putty for plastic models. It will fill any void and can be formed to many shapes.

The Weller SPG80L is a heavy duty 80 Watt soldering iron. It is ideal for soldering chassis connections in classic amps such as can capacitors and can be used in many other applications. This soldering iron has an indicator light that shows when the iron is turned on for safe use. The barrel is stainless steel and the rugged tip is replaceable. The impact resistant handle remains cool when in use. Features:

• 900°F tip temperature suitable for chassis soldering and other heavy duty applications
• Indicator light to show when the iron is on
• 3/8” chisel tip
• 6 foot power cord
• Metal stand included

High quality digitally controlled soldering iron from Atten. The ST-2090D is a 80W benchtop soldering iron with a ton of features packed into its small package. This powerful iron features accurate and adjustable temperature control along and is compatible with a wide variety of tip options. This iron has a built-in dry tip cleaner and an attachable solder spool stand. Conical tip included. Features

• Digital led display
• Combined soldering station with soldering iron and solder wire holder.
• MCU controlled temperature calibration with PID system equipped
• Adjust temperature by knob button, easy to operate.
• The handle structure is ergonomically designed for comfortable grip.
• The heating wire and sensor are made of PTC material, which is quick in temperature rise and precise in temperature control.
• Auto-standby, auto-shut down is available.

The GrooveTech Guitar Player Tech Kit has everything you need to take care of your guitar with confidence, featuring top-shelf tools that have been optimized for just about every make and model of guitar. For your truss rod and string action adjustments, take your pick from the 11 color-coded hex wrenches—gold for metric, black for imperial. Truss rod sizes come with ball ends for hard-to-reach nuts. Check your neck relief with the capo and thickness gauge and your string action with the ruler. The 6-in-1 screwdriver, which comes with two Phillips bits, two slotted bits, and two nut drivers, allows for easy tightening or removal of various hardware pieces. Remove your strings in no time with the string cutters—they’ll cut through even bass strings with ease—and then string up again with a fast-action string winder. Tools are guaranteed with a limited lifetime warranty. Never worked on your instrument before?

Unique tool for the easy removal and adjustment of potentiometers and switches from guitars