Tools

Rocket Sockets by Pepers' Pedals allow for the tightening of various nuts for jacks, potentiometers and switches on guitar effects pedals without scratching the enclosure and damaging the graphics or paint as the typical metal tools will do.

The Better Setter tool is essentially a mini set square for control knobs ensuring the knobs are lined up perfectly every time. The U-shaped slot is fitted around the pot shaft and the adjustable straight edge is then aligned and set to the edge of the enclosure. The two white lines on the U-shaped slot can then be used to set the knob to the beginning or end of the pot’s travel. Works best with 7mm bushing potentiometers.

The DK Multi Multi-Tool is a drum key made from pro-grade materials for exceptional durability with three metric-hex-wrench ends to cover pedal and other adjustments. The DK Drum Multi Multi-Tool is the sturdiest, handiest drum key you’ll ever buy. Made from pro-grade chrome vanadium steel, the centerpiece is a forged skeleton made to precision tolerances, ensuring exceptional durability and a proper fit. It comes wrapped in a polypropylene jacket for a comfortable feel. But that’s not all. We added three metric hex wrenches to cover the most common sizes found on drum hardware—especially pedals. Even with all of these features, the DK Multi Multi-Tool is about the same size as a standard drum key. This is likely to become your favorite. GrooveTech Tools offer a lifetime of quality instrument care for players of all levels.

An exclusive design from GrooveTech founder Dan Parks, this CaseTools Guitar Multi-Tool allows you to make quick tweaks to your Fender USA Guitar, and it’s small enough to fit right in the palm of your hand. It features four different sides: 1/8” ball-end hex wrench for truss rod adjustments, 1/16” and .05” hex wrenches for bridge adjustments, and a custom Phillips screwdriver bit shaped to handle both #1 and #2 screws like those in your neck and pickguard.

This multi-tool has everything you need to maintain your drum kit before, during, and after performances and practice sessions, from our T-Handle Drum Key to screw driver bits and hex key wrenches. Drums take a beating. Literally. That means ongoing adjustment and repair—even during a performance. That’s where the GrooveTech Drum Multi-Tool comes in. It'll quickly remedy problems on virtually all makes and models of drums and hardware, starting with a drum key that's made to the same high standards as our T-Handle Drum Key. And no multi-tool would be complete without the standard array of screwdrivers, so we provide a 5mm slotted and #1 and #2 Phillips. But where this tool really adds value is its collection of both inch and metric hex wrench sizes to handle pedals and other hardware.

This multi-tool has everything you need to make quick, gig-saving adjustments on the fly, featuring hex wrenches, screwdrivers, and a precision ruler for tremolo, action, pickup height, and other basic tweaks using both metric and imperial units. The GrooveTech Mini-Multi Guitar/Bass Multi-Tool is designed for all those on-the-fly adjustments you might need to make when it counts the most. It comes equipped with hex wrenches, screwdrivers, and a precision ruler so that you can quickly adjust your tremolo system, action, pickup height, and other basic functions. Oh, and it comes with a super-handy bottle opener for when you need to get to that refreshing beverage after the gig. Virtually all makes and models of guitars and basses are covered. Tools are pro-grade and absolutely dependable. Don’t head to the gig without a Mini-Multi Guitar/Bass Multi-Tool in your pocket. GrooveTech Tools offer a lifetime of quality instrument care for players of all levels.

Hand riveter with four nose pieces and 100 rivets. The included nose pieces fit 3/32”, 1/8”, 5/32”, and 3/16” rivets. A small wrench is tucked into the grip so users can quickly change the nose pieces as needed. This set includes 100 rivets; 25 in each of the compatible sizes.

• 3/32”, 1/8”, 5/32”, and 3/16” nose pieces
• All-steel construction
• Comfortable vinyl grip
• Easily switch between nose sizes using the included wrench

High quality Phillips head truss rod wrench. This Japanese made wrench is the perfect tool for cross slotted truss rod nuts found on many Fender® necks. The compact 9mm diameter head has a thin 11mm width allowing for adjustments without removing the neck

Staking tool for small eyelets such as S-HEYE-B. Directions:

• Drill hole using #42 drill bit
• Insert eyelet
• Flip board over onto a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

The GrooveTech Guitar/Bass Multi-Tool has everything you need to give your guitar or bass a full setup—and it’ll all fit in your pocket or your gig bag. For truss rod adjustments, this multi-tool is equipped with three ball-end hex wrenches for standard nuts and a a 5/16” nut driver for Gibson-style nuts. Additional hex wrenches cover bridge and tremolo adjustments, and if you need to work on an instrument with vintage-style saddle screws, the 2.5mm slotted screwdriver is ready to go. Need to remove your pick guard or neck plate or put on a new set of Straplok® Strap Buttons? The two Phillips screwdrivers will take care of these and other needs. Finally, the ruler will help you check neck relief and string action.
All wrenches are pro-grade, using heat-treated S2 steel with a polished chrome finish.

Staking tool set that includes both the anvil and swage/punch. The set works with standard turret and eyelet sizes commonly used in amplifiers. The anvil also can be used with Y style turrets.

6-Piece Mini-driver Kit. Features:

• Miniature version of compact convertible set. for precise detail work.
• Mini-drivers consist of jeweler's type and Phillips® screwdriver blades.
• Molded in color-coded plastic handles.
• Contains a black torque amplifier handle.
• Furnished in see-through plastic case.

Heavy duty wire strippers with additional cutting and crimping features. Capable of stripping 12 through 24AWG stranded wires and 10 through 22AWG solid wires, these strippers can handle most wires used in electronics.

Extra long nose, Serrated jaws, Green cushion grips Product Features:

• Long needle nose pliers
• Extra long nose
• Features serrated jaws
• Features green cushion grips

5" wire stripper & cutter with cushion grip handles. Features:

• Cuts and strips both solid and stranded wire cleanly, neatly.
• Adjustable screw stop for different wire sizes.
• Hardened with ground blades.
• Red plastic-coated cushion grip provides maximum leverage.
• Strips 8AWG - 22AWG wire.

Spring loaded center punch with an adjustable force for aligning pilot holes when drilling into materials. The large handle makes the push-to-strike action simple and accurate. Rotating the red handle adjusts the force amount.

Contains 6 different tools for all standard adjustments. Tools are Delrin with the exception of the potentiometer adjustment tool which is Nylon.
Tools are:

• 8282 Zenith type Hex/Screwdriver
• 8606 5" Hex wrench
• 9091 Hex iron core tool
• 9300 5" Double sided hex tool
• 9304 Hex screwdriver combination
• 8608 Potentiometer Adjustment Tool

Turret staking tool for use with our turrets (S-HTUR-SG-2X, S-HTUR-SG-3X, S-HTUR-PR-3S).
For anvil see S-T1717
For smaller staking tool, see S-T1714
Directions:

• Drill 1/8" hole
• Insert eyelet
• Flip board over on to a hard service
• Center staking tool over the eyelet
• Strike staking tool with hammer to clamp eyelet to board

Gear duster from Befaco. The Befaco Synth Duster is a great tool for getting dust off of faceplates and other hard to reach spots on your equipment. The super soft bristles can gently clean around pots, jacks, and other hardware.

Diamond fret file with offset shape for more comfortable fret dressing and improved clearance over the guitar body at high frets. Both full length concave filing grooves (for medium and wide fretwire) uniformly coated with micro industrial diamond particle.

Seizer forceps. Product Features:

• Versatile tool with unusual holding qualities
• Clamps firmly to hold wires for soldering
• Acts as a heat sink and retrieves small parts from hard-to-reach places
• Precision-machined from perfectly tempered stainless steel
• Box-joint construction
• 3-position snap lock
• Serrated jaws

Simple and easy to use nut driving tool for the slotted nuts found on Qingpu jacks that are commonly used in Eurorack modules. The tool anchors into the sleeve of the jack ensuring no slippage when in use, protecting the faceplate from accidental damage. The two grip holes are cut to the size of M2.5 and M3 hex nuts and can be used in a pinch to tighten nuts of those sizes, or to hang your tool on a keyring! One side of the tool works with Mod "Top Brass" nuts and slotted W-QP-NUT-K nuts used on W-QP-518MA, W-QP-419GR, and W-QP-518MA-BM. The other side works with slotted W-QP-NUT-PJ-R nuts used on W-QP-PJ3410. Either side will work with Befaco Bananuts for 3.5mm jacks (W-BNUT-X). The nut driving tool is made of steel.

GrooveTech soundhole truss rod wrench for acoustic guitars. Acoustic guitar truss rods need adjustment just like electrics, but manufacturers sure don't make it easy. Access is typically through the sound hole, sometimes through a brace to an unseen nuts. These wrenches allow quick access to nuts on most makes and models of acoustics, with a precision ball-end tip for easy fit, extra length on both segments of the blade, and an oversized handle for confidence when making adjustments. Professional-grade.

Xcelite Curved Nose Pliers, with 60° curved nose, and green cushion grips. Replacement spring is S-TCPS7
Product Features:

• Curved nose pliers
• Thin tip
• Features green cushion grips
• Features serrated jaws