Transistors

Transistor - 2N6027 Programmable Unijunction
2N6027 programmable unijunction transistor often referred to as a PUT. The 2n6027 can be found in many tremolo effects pedal projects.
Please Log In to view prices
Transistor - J112, JFET, N-Channel,TO-92
J112 N-Channel JFET in a TO-92 package. Designed for low level analog switching, sample and hold circuits and chopper stabilized amplifiers.
Please Log In to view prices
Transistor - ACY31, Germanium, TO-1 case, PNP
ACY31 PNP germanium transistors. The ACY31 is a popular PNP for fuzz pedals and other effects. The ACY31 can be found in the rare CSL Super Fuzz version of the MKIV Tone Bender. This transistor is in a TO-1 package with long leads commonly found on germanium transistors.
Please Log In to view prices
Transistor - 2N1307, Germanium, TO-5 case, PNP
2N1307 PNP germanium transistors. The 2N1307 is a popular PNP for fuzz pedals and other effects. This transistor is in a TO-5 package with long leads commonly found on germanium transistors.
Please Log In to view prices
Transistor Set - tested and selected for Fuzz Face, 2N1309, PNP, Germanium
This is a set of two 2N1309 germanium transistors that have been hand-selected to work in the germanium Fuzz Face circuit. Also included are 4 metal film resistors to use in the circuit. In most cases, the values have been modified from the stock values slightly to ensure that the collector of Q2 biases to roughly -4.5V. A data sheet containing the schematic and the resistor values is included so that you can use your own resistor type if you would prefer. There is a range of bias voltages that can sound nice in a Fuzz Face, and voltages in original units varied. These transistors have been tested with bias voltage, sound, and noise level in mind. Note that due to a variety of factors such as battery/PSU voltage, temperature, and component tolerance, the voltage on the collector of Q2 may not measure at exactly -4.5V, but it should be close in a properly-built circuit.
Please Log In to view prices
Transistor - OC45, Valvo, Germanium, SO-2 glass case, PNP
Valvo brand OC45 PNP germanium transistors. The OC45 is a popular PNP for fuzz pedals and boost effects. This transistor is in a glass SO-2 package with long leads commonly found on germanium transistors. The dot indicates the collector lead.
Please Log In to view prices
Transistor - TIP41C, NPN Epitaxial Transistor
Transistor TIP41C, TO-220 Case. NPN Epitaxial Silicon Transistor Complementary to TIP42 (P-QTIP42C) Max ratings:
  • Collector-Base voltage = 100V
  • Collector-Emitter Voltage = 100V
  • Emitter-Base Voltage = 5V
  • Collector current (DC) = 6A
  • Collector current (Pulse) = 10A
  • Base current = 2A
Please Log In to view prices
Transistor - AS394H, Matched Pair, Alfa, TO5-8 case, NPN
The AS394H is a junction isolated ultra well-matched monolithic NPN transistor pair with an order of magnitude improvement in matching over conventional transistor pairs. Electrical characteristics of these devices such as drift versus initial offset voltage, noise, and the exponential relationship of base-emitter voltage to collector current closely approach those of a theoretical transistor. Extrinsic base and emitter resistances are very low, giving very low noise and operating over a wide current range. To guarantee long term stability of matching parameters, internal clamp diodes have been added across the emitter-base junction of each transistor. These prevent degradation due to reverse biased emitter current, the most common cause of field failures in matched devices.
Please Log In to view prices
Transistor - MJ15025, TO-3 case, power
Transistor MJ15025, TO-3 Case The MJ15025 is a power transistor designed for high-power audio, disk head positioners, and other linear applications Features:
  • High Safe Operating Area: -2A @ 80 V
  • High DC Current Gain hFE = 15 (Min) @ IC = 8 Adc
Please Log In to view prices
Transistor - Peavey, MPS 6533, PNP Amplifier, 40V, TO-92
MPS 6533, PNP general purpose amp, 40V, TO-92 Case.
Please Log In to view prices
Transistor - 2N4123, Silicon, TO-92 case, NPN
The 2N4123 is a general purpose silicon NPN transistor in a TO-92 case. The 2N4123 is primarily intended for general purpose amplification. It is a popular choice for silicon fuzz pedals due to its low hFE specifications.
Please Log In to view prices
Transistor - MPSA63, Darlington, -500mA, -30V, PNP
MPSA63 PNP Darlington transistor (TO-92 package) - designed for high gain, low noise general purpose amplifier applications.
  • Max collector to emitter voltage = -30V
  • Max collector to base voltage = -30 V
  • Max emitter to base voltage = -10 V
  • Max collector current = -0.5 A (continuous)
Please Log In to view prices
Transistor - BC548, General Purpose, TO-92 case, NPN
The BC548 is a silicon general purpose NPN transistor in a TO-92 package. The BC548’s typical applications include signal processing, amplification, and switching. The BC548 is available in two different gain ranges: BC548B and BC548C. Type hFE (IC=2mA, VCE=5V) BC548B 200-450 BC548C 420-800
Please Log In to view prices
Transistor - AC132K, Germanium, Heatsink TO-1 case, PNP
AC132K PNP germanium transistors. The AC132K is a popular PNP for fuzz pedals and other effects. This transistor is in a thick rectangular heat-sink package with long leads commonly found on germanium transistors.
Please Log In to view prices
Triac - Q6025P5 - Alternistor, 600V, 25A, Fastpack TO-3 Base
Alternistors are specifically designed for applications which are required to switch highly inductive loads. To accomplish this, a special chip has been designed which effectively offers the same performance as two thyristors (SCRs) wired inverse parallel (back to back); hence the alternistor has better turn-off behavior than a standard triac.
Please Log In to view prices
Transistor - 2N5172, Silicon, TO-92 case, NPN
The 2N5172 is a silicon general purpose NPN transistor in a TO-92 package. The 2N5172’s typical applications include general purpose amplification and switching.
Please Log In to view prices
Transistor - 2N4403, Silicon, TO-92 case, PNP
The 2N4403 is a silicon general purpose PNP transistor in a TO-92 package. The 2N4403’s typical applications include signal processing, amplification, and switching.
Please Log In to view prices
Transistor - MJ15015, NPN, Complementary High-Power
Transistor MJ15015, TO-3 Case, NPN
PowerBase complementary transistors designed for high power audio, stepping motor and other linear applications. These devices can also be used in power switching circuits such as relay or solenoid drivers, dc–to–dc converters, inverters, or for inductive loads requiring higher safe operating areas.
Safe Operating Area - Rated to 60V
Please Log In to view prices
Transistor - TIP42C, PNP Epitaxial Transistor
Transistor TIP42C, TO-220 Case.
PNP Epitaxial Silicon Transistor
Complementary to TIP41 (P-QTIP41C)
Max ratings:
  • Collector-Base voltage = -100V
  • Collector-Emitter Voltage = -100V
  • Emitter-Base Voltage = -5V
  • Collector current (DC) = -6A
  • Collector current (Pulse) = -10A
  • Base current = -2A
Please Log In to view prices
Transistor - ZTX457, NPN, Medium Power, High Voltage
High voltage medium-power ZTX457 transistor.
Features:
  • 300 Volt Collector-Emitter Voltage
  • 300 Volt Collector-Base Voltage
  • 0.5 Amp continuous current
  • 1 Watt Maximum Power Dissipation
Please Log In to view prices
Transistor - Peavey, 2N5400, PNP Amp, 120V, 20MA, TO-92
2N5400 (761), PNP general purpose amp, 120V, 10mA, TO-92 case.
Please Log In to view prices
Transistor - 2N3704, Silicon, TO-92 case, NPN
The 2N3704 is a general purpose silicon NPN transistor in a TO-92 case. The 2N3704 is primarily intended for general purpose amplification and switching applications.
Please Log In to view prices
Transistor - BC557C, General Purpose, TO-92 case, PNP
The BC557 is a silicon general purpose PNP transistor in a TO-92 package. The BC557’s typical applications include signal processing, amplification, and switching.
Please Log In to view prices
Transistor - BC148C, Silicon, Lockfit case, NPN
BC148C NPN transistor in a rare Mullard Lockfit package. The BC148C is the equivalent of a BC108C but in the Lockfit package rather than a TO-18. The BC148C was used in a variety of audio and radio equipment and works well for fuzz and other effects.
Please Log In to view prices